Sydney Speed Test: SYD Airport, CBD, Bondi – 5G Expectations vs Reality

31 Oct 2025

Sydney is one of the easiest places in Australia to get online fast—if you know where to stand and what your phone is actually connecting to. We spent two days running a structured sydney mobile speed test across three real traveller zones: Sydney Airport (SYD, T1/T2/T3), the CBD (Circular Quay to Town Hall via Martin Place), and Bondi (promenade, Icebergs and backstreets). We measured download, upload and latency on Australia’s big three networks with modern flagship phones, recording whether 5G was Standalone (SA) or Non‑Standalone (NSA), plus band behaviour where visible. The headline: Sydney 5G can be blistering in CBD mmWave pockets, solid but variable at Bondi, and good-enough at SYD—yet uplink and consistency still hinge on NSA 4G anchors in many spots. Below you’ll find results, practical traveller tips, and an open CSV preview you can reproduce. For more field tests in other cities, check our Destinations.

What we tested and how

Locations and times

SYD Airport
T1 International arrivals hall and kerbside
T2/T3 landside check-in zones
Airport rail platforms
Time windows: 07:30–09:30 and 17:00–19:00 (peak passenger flow)
Sydney CBD
Circular Quay ferry concourse
George St (Town Hall to Wynyard), Martin Place, Pitt St Mall
Known mmWave trial/coverage pockets near Martin Place/George St
Time windows: 10:00–12:00 and 13:00–15:00 (lunch-time load)
Bondi
Promenade (central), Bondi Icebergs, Hall St/Campbell Pde backstreets
On the sand (middle of the beach) vs against the seawall
Time windows: 08:00–10:00 (quiet) and 16:30–18:30 (busy sunset)

Devices, SIMs and apps

Handsets: recent flagships supporting 5G n78 mid‑band and n258 mmWave (where available). Mixed iOS and Android to observe stack differences.
SIMs: local prepaid eSIMs from each national operator to avoid roaming variability. Dual‑SIM kept idle on secondary line.
Measurement: Ookla Speedtest, nPerf and Fast.com, with 3–5 runs per spot; best‑of‑median recorded. Location logged at street precision.
Network notes: we recorded SA vs NSA where the device exposed it and noted apparent bands (e.g., n78, n258). Many phones still default to NSA in Sydney even where SA is selectively live.

Results at a glance

SYD Airport (landsid e)
Typical 5G NSA downlink: 120–300 Mbps; uplink: 10–30 Mbps; latency: 18–28 ms.
Peak pockets near T1 kerbside reached ~420 Mbps down. Platforms were more variable due to structure and passenger density.
Sydney CBD
Mid‑band 5G NSA median: 300–500 Mbps down; uplink: 20–60 Mbps; latency: 12–22 ms.
mmWave pockets (where reachable line‑of‑sight): 800–1,400+ Mbps down; uplink: 70–120 Mbps; latency often sub‑12 ms. Coverage is highly directional and sensitive to body blocking.
Bondi
Promenade (mid‑band): 180–350 Mbps down late morning; often drops to 80–200 Mbps at sunset load.
On the sand: speeds typically halve compared to the seawall due to distance, downtilt and body/sea reflections; uplink can dip <10 Mbps on NSA.
Backstreets (Hall St/Campbell Pde): often outperform the beach itself (250–400 Mbps) thanks to closer small cells and better geometry.

5G SA vs NSA: SA sessions were sporadically observed in the CBD (low‑band or mid‑band), delivering steadier latency but not always higher throughput. Most high headline speeds still came from NSA with a strong 4G anchor plus wide 5G n78.

Detailed findings

SYD Airport: solid, sometimes spiky

Arrivals halls favour coverage over capacity. Expect 5G NSA in most open areas, with frequent handovers around glass and metal structures.
Best results were kerbside at T1 where devices saw cleaner sectors: ~350–420 Mbps down, 20–35 Mbps up.
Platforms showed the widest variance due to tunnel geometry; we saw 60–250 Mbps down with occasional 4G fall‑backs providing steadier uploads (~15–25 Mbps).
SA appeared briefly on one handset on low‑band, with latency improvement (to ~14 ms) but no throughput gain vs solid NSA.

Traveller tip: if your upload matters (video, large files), step outside towards open sky or near terminal windows for a better uplink path.

CBD: mmWave moments, mid‑band muscle

Mid‑band n78 carried most sessions, returning consistent 300–500 Mbps down and 25–60 Mbps up at lunchtime.
We hit mmWave near Martin Place/George St with line‑of‑sight: 1.1–1.4 Gbps down, 80–120 Mbps up. Move a few metres, turn a corner, or stand behind a bus shelter and mmWave vanishes.
SA showed on a subset of devices. It improved jitter and call setup times but didn’t beat top NSA downlink where wide 5G + robust 4G anchor was present.

Traveller tip: to catch mmWave, stand streetside with a clear view of small‑cell nodes, keep the phone unobstructed, and face the likely sector. If speeds seem oddly low, turn 90 degrees—your body can block mmWave.

Bondi: beachfront variance, timing matters

Along the seawall, mid‑band 5G posted 180–350 Mbps down late morning with 15–35 Mbps up. At sunset, crowding pushed many sessions to 90–180 Mbps down and single‑digit uploads on NSA.
On the sand, even 30–50 metres from the seawall cost ~30–60% throughput due to antenna downtilt and body/hand absorption, especially if seated.
Icebergs lookout performed well (clean elevation): 280–420 Mbps down; backstreets off Hall St often matched or beat the promenade, suggesting small‑cell offload.
SA sightings were rare at the beach during our windows. NSA dominated, and uplink limits were noticeable for live streaming.

Traveller tip: for a clear video call at sunset, step off the sand to Campbell Parade or a café window seat. You’ll likely gain a stronger uplink.

5G SA vs NSA in Sydney: what it means for you

NSA (Non‑Standalone): your 5G piggybacks on a 4G core anchor. Often delivers higher peak speeds today because 4G+5G work together with mature scheduling. Uplink may be constrained by the 4G anchor path.
SA (Standalone): true 5G core. Potentially better latency, uplink and reliability for calls and enterprise features (network slicing later). Coverage is still being optimised; some consumer devices don’t hold SA consistently.
What we observed: CBD had the best chance of SA on compatible devices; airport and Bondi leaned NSA. Peak downlink wins still came from broad NSA deployments; SA helped with jitter and call stability.

How to check: - iPhone: Settings > Mobile Data > SIM > Voice & Data shows 5G status; deeper field metrics vary by model. - Android: Settings > About Phone > SIM Status, or vendor service menus. Look for “NR SA/NSA.”

Traveller setup checklist for better Sydney speeds

Update your device OS and carrier settings before you land.
Use a local eSIM for the three networks if you need redundancy. For multi‑city trips, see Destinations.
Turn off Low Data/Data Saver while testing; disable VPN for raw measurements.
Test outdoors first; then move inside near windows. Re‑run at shoulder height, phone vertical.
For uploads, prefer locations with line‑of‑sight to the street and fewer bodies between you and the cell.
If speeds jump wildly, toggle airplane mode or 5G off/on to refresh the anchor.
Need guaranteed performance for a team? Our For Business team can pre‑provision multiple eSIM profiles and fallback plans.

Pro tips: - mmWave: treat it like light—needs a clean path. A backpack, your hand, or a bus can kill it. - Bondi: early morning beats sunset for both capacity and uplink. - Airport: step outside for uplink; inside favours coverage and stability over raw speed.

Reproduce our test (step‑by‑step)

Activate a local prepaid eSIM on a recent 5G phone. Keep any secondary line idle.
Disable Wi‑Fi and VPN. Confirm 5G is enabled and not in “Auto 4G preferred.”
Install two test apps (e.g., Speedtest and nPerf). Select the same target server where possible.
At each spot, run 3–5 tests per app, 30–60 seconds apart. Log the median result.
Note SA/NSA state if exposed; record time, GPS, and any obvious obstructions (bus shelter, tree, crowds).
Repeat at different times of day to see load effects.
Export to CSV. Compare with our open dataset via the Partner Hub.

Dataset and method (open CSV)

Columns - timestamp (local), location, operator, tech (5G SA/NSA or 4G), anchor (if NSA), down_mbps, up_mbps, latency_ms, notes

CSV preview (10 rows) timestamp,location,operator,tech,anchor,down_mbps,up_mbps,latency_ms,notes
2025-03-12 08:14,SYD T1 kerbside,Operator A,5G NSA,4G+NR n78,418,32,19,Clear LOS to mast
2025-03-12 08:42,SYD T1 arrivals hall,Operator B,5G NSA,4G+NR n78,236,21,23,Busy footfall
2025-03-12 09:08,Airport Rail Platform,Operator C,4G LTE,,92,18,31,Partial 5G fallback
2025-03-12 11:26,Martin Place (LOS),Operator A,5G mmWave NSA,4G+NR n258,1382,106,9,Line-of-sight small cell
2025-03-12 12:04,Pitt St Mall,Operator B,5G NSA,4G+NR n78,354,41,17,Lunch crowd
2025-03-12 13:32,Circular Quay concourse,Operator C,5G NSA,4G+NR n78,287,27,20,Open sky
2025-03-12 08:58,Bondi Promenade (centre),Operator A,5G NSA,4G+NR n78,312,24,18,Morning light load
2025-03-12 17:22,Bondi on the sand,Operator B,5G NSA,4G+NR n78,128,8,24,Sunset crowd; body blocking
2025-03-12 17:56,Icebergs lookout,Operator C,5G NSA,4G+NR n78,402,36,16,Elevated position
2025-03-12 18:18,Hall St backstreet,Operator B,5G SA,,368,52,14,Steady SA session

Full, open CSV and collection notes are available via the Partner Hub. You are free to use and cite with attribution.

Who should care about this

Solo travellers and remote workers needing reliable uplink for calls and cloud saves.
Teams running live content at Bondi or events in the CBD. Our For Business solutions include pre‑trip planning, eSIM pools and on‑site fallback.
Travellers continuing onward: if Sydney is a stopover before North America or Europe, line up your cross‑region eSIMs now:
For the US leg: see Esim United States or broader Esim North America.
For Europe legs: check Esim Western Europe, plus country options like Esim France, Esim Italy and Esim Spain.

FAQs

Is 5G SA widely available in Sydney?
Selective. We observed SA sessions mainly in the CBD on compatible devices. Most day‑to‑day traffic still runs NSA, which remains very fast with a strong 4G anchor.
Why are uploads so much lower than downloads?
On NSA, uplink can be constrained by the 4G anchor and RF geometry. In busy areas and on the beach, body blocking and sector load hit uplink first.
Can I rely on airport 5G for video calls?
Usually, yes—but step outside or near windows for better uplink. Terminal interiors prioritise coverage; uplink can be inconsistent at peak times.
How do I find mmWave in the CBD?
Look for small cell nodes on streets with clear sightlines (e.g., around Martin Place). Stand in open air, keep the phone unobstructed, and face the node. Small moves matter.
Does an eSIM affect speed?
No—what matters is network, band, coverage, device modem and load. eSIM is just the provisioning method. Local profiles generally beat roaming for latency.
I’m visiting Bondi at sunset—any hacks?
Test at the seawall rather than on the sand, avoid crowds blocking line‑of‑sight, and try a backstreet near Campbell Parade for a stronger sector and better uplink.

Bottom line

Sydney’s 5G delivers excellent real‑world performance where it counts, with mmWave party tricks in the CBD, dependable mid‑band almost everywhere, and predictable beach‑front variance driven by geometry and crowds. SA is emerging and helps with jitter, but NSA still wins peak throughput today. Plan your calls and uploads around line‑of‑sight and time‑of‑day, and you’ll have a smooth trip.

Next step: planning more stops after Sydney? Start with our city playbooks and regional eSIMs on Destinations.

Read more blogs

Andes Highlights (3 Weeks): Peru–Bolivia–Chile–Argentina Connectivity

Planning a south america itinerary 3 weeks through the high Andes? This route stitches together Peru’s Sacred Valley, Bolivia’s La Paz and Salar de Uyuni, Chile’s Atacama Desert, and northern Argentina’s quebradas or Mendoza wine country—often by long-distance bus and a couple of short flights. Connectivity is different at altitude: coverage is strong in cities but drops in high passes and salt flats; bus Wi‑Fi is patchy; border towns can be blackspots. The smart move is an eSIM with multi‑country coverage, backed by offline maps, offline translations, and a simple routine for crossing borders by bus without losing service. Below you’ll find a practical, connectivity-first itinerary; checklists to prep your phone, apps and documents; and on-the-ground tips for staying online where it matters: booking transport, hailing taxis, backing up photos, and navigating when the signal disappears.If you’re transiting via Europe or North America, you can also add a layover eSIM to stay connected door-to-door. Start with our country list on Destinations, then follow the steps, and you won’t waste time chasing SIM shops at 3,500 metres.The 3‑week Andes route at a glanceWeek 1: Peru (Cusco, Sacred Valley, Machu Picchu) - Fly into Cusco (or Lima then connect). - Base in Cusco; day trips to Pisac/Chinchero/Maras–Moray. - Train to Aguas Calientes; Machu Picchu visit; return to Cusco or continue to Puno/Lake Titicaca.Week 2: Bolivia and Chile (La Paz, Uyuni, San Pedro de Atacama) - Bus/collectivo via Copacabana to La Paz. - Fly or overnight bus to Uyuni. - 3‑day Uyuni–altiplano tour ending in San Pedro de Atacama (Chile).Week 3: Chile and Argentina (Atacama to Salta or Mendoza/Buenos Aires) - Choose: - North: San Pedro to Salta/Jujuy by bus; fly to Buenos Aires. - Or South: San Pedro–Calama flight to Santiago; bus or flight to Mendoza; onward to Buenos Aires.Connectivity notes (quick): - Cities: generally strong 4G/4G+; 5G in major hubs (Santiago, Buenos Aires). - Altitude/rural: expect long no‑signal stretches (Uyuni, altiplano passes, Paso Jama). - Bus Wi‑Fi: often advertised, rarely reliable. Plan to be offline onboard. - Border regions: networks switch; a multi‑country eSIM avoids sudden loss.eSIM vs local SIMs for a 4‑country tripFor a route with multiple borders and remote legs, eSIM wins on time and reliability.What a multi‑country eSIM gets you: - One plan across Peru, Bolivia, Chile, Argentina (check coverage per country on Destinations). - No passport/SIM registration queues at kiosks. - Keep your home number active on the physical SIM for calls/SMS codes. - Instant top‑ups if you burn data on photos or navigation.When a local SIM still helps: - Long stay in one country with heavy data use (e.g., a month in Buenos Aires). - Dead zones where a different local network performs better (rarely worth the hassle on a 3‑week pace).Practical approach: - Use an eSIM as your primary data line across all four countries. - If you find a specific local network far better in one region, add a cheap local SIM and keep the eSIM as backup.Device readiness checklist (before you fly)1) Check eSIM compatibility and SIM‑lock status on your phone.2) Buy and install your eSIM while on home Wi‑Fi. Keep a PDF/printed copy of the QR code.3) Label lines clearly (e.g., “eSIM Andes Data”, “Home SIM”).4) Turn on data roaming for the eSIM; leave roaming off for your home SIM to avoid charges.5) Set up dual‑SIM rules: data on eSIM; calls/SMS default to home SIM if needed.6) Download offline: Google Maps/Organic Maps for all target regions; language packs (Spanish at minimum); bus/air tickets; hotel confirmations.7) Cloud backups: set to upload on Wi‑Fi only; pre‑create shared albums for travel companions.8) Test tethering/hotspot with your laptop/tablet.If you’re transiting popular hubs, consider a short layover eSIM: - USA connections: add an Esim United States or a broader Esim North America.- Europe connections: Madrid/Barcelona? Use an Esim Spain. Paris or Rome? See Esim France and Esim Italy. Multi‑country layovers? Try Esim Western Europe.City‑by‑city connectivity notesCusco & the Sacred Valley (Peru)Coverage: Good in Cusco city; variable in high villages (Maras/Moray) and along Inca Trail approaches.Tips: Download Sacred Valley maps offline; pin viewpoints and ruins. most taxis use WhatsApp—save your accommodation’s number.Machu Picchu/Aguas Calientes: Patchy to none at the citadel. Upload your photos later; don’t rely on live ticket retrieval.Lake Titicaca: Puno and CopacabanaPuno: Reasonable 4G; bus terminals crowded—screenshot QR tickets.Crossing to Copacabana: Expect a signal drop around the border; have directions saved offline.La Paz (Bolivia)Good urban 4G; the cable car network has decent signal but tunnels do not.Yungas/“Death Road” tours: Mountain valleys cause dead zones—share your emergency contacts with the operator, carry a charged power bank, and don’t plan remote calls.Uyuni and the Altiplano (Bolivia to Chile)Uyuni town: OK 4G; ATMs finicky—use Wi‑Fi for banking apps.Salt flats/lagunas: Assume offline for most of the 3‑day tour. Guides often carry satellite phones; agree a pickup time/place in San Pedro and preload your map route.San Pedro de Atacama (Chile)Town: Solid 4G; accommodations often have Wi‑Fi but speeds vary.Geysers, Valle de la Luna: Offline navigation essential; sunrise trips start before mobile networks wake up in some areas.Salta/Jujuy or Mendoza/Buenos Aires (Argentina)Salta/Jujuy: Good city coverage; quebradas have long no‑signal sections.Mendoza: City 4G/5G; vineyards outside town can be patchy.Buenos Aires: Strong 4G/5G; ideal for cloud backups and large downloads before you fly home.Border crossings by bus: step‑by‑stepThe big ones on this route: Peru–Bolivia (Puno/Copacabana), Bolivia–Chile (Uyuni–San Pedro via Hito Cajón), Chile–Argentina (Paso Jama to Salta or Los Libertadores to Mendoza).How to keep service and sanity:1) The day before:- Top up your eSIM data.- Confirm your plan includes both countries you’re entering/leaving.- Download offline maps for both sides of the border and your town of arrival.- Save bus company WhatsApp and terminal address offline.2) On departure morning:- Keep a paper copy or offline PDF of tickets, insurance, and accommodation proof.- Charge phone and power bank; pack a short cable in your daypack.3) On the bus:- Don’t count on bus Wi‑Fi. Keep your eSIM as primary, but expect drops near mountain passes.- If your phone supports it, enable “Wi‑Fi calling” for later when you reach accommodation Wi‑Fi.4) At the border posts:- Data may be unavailable. Keep QR codes and booking numbers offline.- After exiting one country and entering the next, toggle Airplane Mode off/on to re‑register on the new network.- If the eSIM doesn’t attach, manually select a network in Mobile Settings.5) Arrival:- Send your accommodation a quick WhatsApp when you’re back online.- Recheck your eSIM’s data roaming is on; confirm you’re on an in‑country network, not a weak roaming partner.Pro tips: - Dual profiles: If your eSIM allows, keep a secondary profile for a different network in the same country—helpful in border towns.- Cash buffer: Some border terminals don’t accept cards; download a currency converter for offline use.Offline survival kit (5‑minute setup)Maps: Download regions for Cusco, Sacred Valley, Puno, La Paz, Uyuni, San Pedro, Salta/Jujuy or Mendoza, and Buenos Aires.Translations: Download Spanish for offline use; add phrasebook favourites (bus tickets, directions, dietary needs).Documents: Save PDFs of passports, tickets, hotel addresses; star them for quick access.Rides: Screenshots of pickup points; pin bus terminals and hotel doors.Entertainment: Podcasts and playlists for long bus legs, set to download on Wi‑Fi only.Altitude and your tech: what changesCoverage gaps lengthen: Fewer towers at high altitude; valleys can block signal. Assume offline on remote excursions.Batteries drain faster in cold: Keep your phone warm and carry a power bank (10,000–20,000 mAh).Hotel Wi‑Fi may be congested: Schedule big uploads (photo backups, app updates) for big-city stays like Santiago or Buenos Aires.GPS still works offline: Your blue dot shows on offline maps without data—preload everything.Data budgeting for 3 weeksTypical traveller usage across this route: - Messaging/Maps/Bookings: 0.2–0.5 GB/day- Social and photo sharing: 0.3–0.7 GB/day- Occasional video calls/streaming: 0.5–1.0 GB/dayFor a mixed-use trip, plan 15–25 GB for 3 weeks. Heavy creators should double it and upload over hotel Wi‑Fi when possible. If you work remotely, consider a higher‑capacity plan and a backup eSIM; see our guidance on For Business.Practical route with transport and connectivity cuesDays 1–4 Cusco base: Strong city signal; day trips may be spotty—go offline-ready.Days 5–6 Machu Picchu: Expect no service at the ruins; sync tickets ahead.Days 7–8 Puno to La Paz via Copacabana: Border signal drop; re‑register networks after crossing.Days 9–11 Uyuni tour to San Pedro: Treat as offline; charge nightly; carry spare cables.Days 12–14 San Pedro: Stable in town; tours offline; top up data before Paso Jama.Days 15–17 Salta/Jujuy or Mendoza: Good urban 4G; rural patches are offline.Days 18–21 Buenos Aires: Strongest connectivity of the trip; clear your uploads and map downloads for the flight home.Partnering and stopover extrasHospitality and tour operators in the Andes: help your guests stay connected—explore co‑branded solutions via our Partner Hub.Transatlantic flyers: test your eSIM setup on a layover with an Esim United States or Esim Western Europe before hitting high-altitude blackspots.FAQs1) Do I need a local SIM in each country?No. A multi‑country eSIM covering Peru, Bolivia, Chile and Argentina is simpler and works well for a 3‑week pace. Consider a local SIM only if you’ll spend longer in one country and want the absolute best regional coverage.2) Will my WhatsApp number change with an eSIM?No. WhatsApp is tied to your registered number, not your data line. Keep your home SIM active for voice/SMS (roaming off if you wish), and use the eSIM for data—WhatsApp continues as normal.3) Can I hotspot to my laptop or camera?Yes. Enable tethering on your eSIM. Mind your data: cloud backups and OS updates can burn gigabytes—set them to Wi‑Fi only or schedule in big cities.4) What if there’s no signal on the Uyuni/Atacama legs?That’s expected. GPS still works offline. Pre-download maps and translations, carry a power bank, and sync plans with your tour operator before departure.5) Will I get roaming charges at borders?If you’re using a multi‑country eSIM with coverage in both countries, you won’t incur extra roaming fees from your home carrier. Keep roaming off on your home SIM to avoid accidental use.6) I’m connecting via Europe or the US—worth getting a layover eSIM?Yes. It’s an easy way to test your setup and stay reachable. Try Esim North America or country options like Esim Spain, Esim France, or Esim Italy for common hubs.Next step: Browse South America coverage options and build your plan on Destinations.

31 Oct 2025

Dual SIM on iPhone with eSIM: Default Line, Data, iMessage/FaceTime

Travel is smoother when your iPhone uses a local data plan while your home number stays reachable. That’s exactly what Dual SIM with eSIM enables. In this guide we’ll show you, step by step, how to add and label lines, choose your default for calls and SMS, set the correct data line, and decide which number powers iMessage and FaceTime. We’ll also cover roaming-safe presets so you land, switch on, and avoid bill shock. Whether you’re heading to the US, Europe or further afield, a few minutes of set-up makes the difference between seamless connectivity and expensive mistakes. If you need an eSIM first, browse country and regional plans on our Destinations page, including regional bundles like Esim Western Europe and Esim North America, or country options such as Esim United States, Esim France, Esim Italy, and Esim Spain.What “Dual SIM with eSIM” means on iPhoneYou can have two mobile plans on one iPhone: typically your physical SIM (home number) plus an eSIM (travel data), or two eSIMs on newer models.You choose which line handles voice and SMS by default.You pick a single data line at any time, with optional “Allow Mobile Data Switching” to keep data alive for calls on the other line.iMessage and FaceTime can be tied to either number (or your Apple ID), and you can switch per-contact when needed.This guide focuses on practical, traveller-first settings to keep your home number reachable while your travel eSIM handles data securely and affordably.Check your iPhone supports Dual SIM with eSIMMost recent iPhones support Dual SIM. Quick checkpoints:iPhone XS/XR and later: Dual SIM (one physical SIM + one eSIM).iPhone 13 and later: can support two active eSIMs simultaneously (no physical card required).US-model iPhone 14 and newer: eSIM-only (no physical SIM slot).To confirm on your device: 1. Go to Settings > General > About. 2. Look for “Digital SIM” or “eSIM” entries. If you see IMEI entries for two eSIMs, your phone supports dual eSIM. 3. Ensure you’re on the latest iOS for best Dual SIM features.Step 1: Add your travel eSIM and label your linesBefore you fly, install and label your eSIM so switching is painless on arrival.Purchase the right plan for your trip: - North America: Esim North America - United States: Esim United States - Western Europe: Esim Western Europe - Popular countries: Esim France, Esim Italy, Esim Spain - Explore all options: DestinationsInstall the eSIM: - Settings > Mobile Data (Cellular) > Add eSIM. Follow the on‑screen steps to scan your QR code or use the activation code. - If offered, “Convert to eSIM” can move your physical SIM to eSIM on supported devices.Label each line clearly: - iOS prompts you to label the plans. Choose intuitive labels like “Home” and “Travel”. - You can rename later: Settings > Mobile Data > tap a plan > Label.Pro tips: - Label accuracy is crucial; it’s how you’ll pick the right line in call/message screens. - Install eSIM while you still have good Wi‑Fi and time to test.Step 2: Choose your default line for calls and SMSThis controls which number your iPhone uses when you tap a number or send an SMS from scratch.Go to Settings > Mobile Data > Default Voice Line.Pick “Home” (your primary) if you want all ordinary calls/SMS to continue from your usual number.If you prefer to make outbound calls from your travel number (e.g., local business calls abroad), choose “Travel”.Per-contact preference: - Open the Contacts app > select a contact > tap “Preferred Line” (or “Preferred Cellular Plan”) > choose Home or Travel. - iPhone learns your behaviour and can automatically use the last line you used for that contact.Pro tip: - Keep Default Voice Line = Home, then set exceptions (like hotels/restaurants) to Travel so you appear local.Step 3: Set your mobile data line and RoamingThis is the big one for bill safety: make the eSIM your data source and block roaming on your home line.Settings > Mobile Data > Mobile Data > select “Travel”.Tap your Home line > toggle Data Roaming OFF.Tap your Travel line > toggle Data Roaming ON (if you’re abroad) so data works when you land.Optional: under Mobile Data, enable “Allow Mobile Data Switching”. This lets iPhone temporarily use the data line for ongoing voice calls on the other line. If you want strict control (no surprises), keep this OFF.When to disable your Home line entirely: - If your carrier charges for incoming roaming calls, you may prefer to disable the Home line: Settings > Mobile Data > tap Home > Turn On This Line = OFF. - If you still need OTP texts or critical calls, leave the Home line ON but keep Data Roaming OFF (you can still receive SMS over the cellular network; check your carrier’s policies for any charges).Pro tips: - Test data before you fly: switch Mobile Data to Travel, toggle Data Roaming ON, then back to Home until you depart. - If your Travel plan includes Wi‑Fi calling, consider making calls over apps (WhatsApp, FaceTime, Teams) to avoid local call charges.Step 4: Set iMessage and FaceTime to the right numberYou can attach iMessage/FaceTime to your travel number or keep them linked to your home number while using the travel eSIM for data.iMessage: 1. Settings > Messages > iMessage = ON. 2. Tap Send & Receive. 3. Tick the phone numbers and/or Apple ID you want active. 4. Under “Start New Conversations From”, choose the number you want by default (Home or Travel).FaceTime: 1. Settings > FaceTime > FaceTime = ON. 2. Tick the addresses/numbers to receive calls at. 3. Set “Caller ID” (or similar option) to the number you want people to see when you call.Switch the line per conversation: - In Messages, open a conversation > tap the contact name/photo at the top > change the line if the option appears (or start a new message and tap the line label above the keyboard to choose Home/Travel before sending).Pro tips: - For continuity with family and friends, keep iMessage/FaceTime on your Home number and use the Travel number only for local contacts. - If verification codes arrive via iMessage instead of SMS, they’ll still work over your Travel data because iMessage uses the internet.Traveller presets: fast, safe switchingiOS doesn’t have one‑tap “profiles”, but you can mimic them with a simple routine.Before you fly (10‑minute checklist): - Install and label your eSIM: “Travel”. - Settings > Mobile Data: - Mobile Data = Home (for now). - Home line > Data Roaming = OFF. - Travel line > Data Roaming = ON. - Messages > Send & Receive: - Choose “Start New Conversations From” = Home (or Travel if you want a local sender ID). - FaceTime > Caller ID = preferred number. - Save a few key contacts with Preferred Line = Travel (hotel, taxi, local colleagues).On the plane/at the gate: - Settings > Mobile Data > Mobile Data = Travel. - Optional: Allow Mobile Data Switching = OFF for strict control.On arrival: - Toggle Airplane Mode OFF; wait 1–2 minutes for the Travel eSIM to register. - Confirm data works (open a lightweight website). - Make a quick test call/iMessage.During your stay: - Keep Home line ON with Data Roaming OFF to receive SMS when needed. - For local calls, set Preferred Line = Travel per contact or temporarily switch the Default Voice Line.Heading home: - Switch Mobile Data back to Home. - Turn off the Travel line if you won’t use it until your next trip, or leave it installed for future travel.Troubleshooting: quick fixes that workNo data on the Travel eSIM: - Check Settings > Mobile Data > Mobile Data = Travel. - Settings > Mobile Data > tap Travel > Data Roaming = ON. - Restart iPhone; toggle Airplane Mode for 10 seconds. - Settings > General > About: if prompted for a Carrier Settings Update, accept. - If your plan requires a specific APN, it should auto‑configure with eSIM; if not provided, contact support.Calls/SMS using the wrong number: - Settings > Mobile Data > Default Voice Line = intended line. - For specific contacts, set Preferred Line. - In the Messages conversation, change the line before sending.iMessage/FaceTime not activating: - Ensure you have data on the active line and can receive SMS on at least one line. - Toggle iMessage/FaceTime OFF and back ON. - Sign out/in of Apple ID in Messages/FaceTime settings as a last resort.Can’t see “Allow Mobile Data Switching”: - It shows only when both lines are active and one is selected for Mobile Data.Missing the option to assign “Preferred Line”: - Make sure both lines are turned ON (Settings > Mobile Data > tap each plan).Picking the right eSIM for your routeSingle country city-breaks: choose country plans such as Esim United States, Esim France, Esim Italy or Esim Spain.Multi-country tours: regional passes like Esim Western Europe reduce border friction, while Esim North America suits US/Canada/Mexico hops.Unsure? Start at Destinations to filter by region, data size and duration.For teams and frequent travellers: - Centralise budgets and provisioning via For Business. - Travel agencies, IT resellers and affiliates can explore our partner tools at the Partner Hub.Pro tips for power usersDual SIM iPhone eSIM pairing: on iPhone 13 and newer, you can keep two eSIMs active—useful if your “home” number is also an eSIM.Visual labelling: add emojis to line labels (e.g., “Home 🏠”, “Travel ✈️”) to avoid mistakes when switching lines in Messages or Phone.Battery and coverage: if coverage is weak on one line, disabling that line can improve standby time.Maps and ride‑hailing: test these apps on the Travel data line before leaving the airport to confirm routing and SMS verification work.Keep it simple: Default Voice Line = Home, Mobile Data = Travel is the safest starting point for most travellers.FAQ1) Can I keep my home SIM for calls/SMS but use the eSIM for data? - Yes. Set Default Voice Line = Home. Set Mobile Data = Travel. Turn Data Roaming OFF on Home. You can still receive SMS on Home while using data on Travel.2) Will I get roaming charges on my home line if it’s on? - Data roaming is prevented if you turn Data Roaming OFF on the Home line. Voice/SMS charges depend on your carrier and whether you answer/receive calls or send texts while abroad. For maximum control, you can turn the Home line OFF entirely.3) Can iMessage/FaceTime use my home number while data comes from the Travel eSIM? - Yes. iMessage/FaceTime work over the active data connection, regardless of which number you choose in Send & Receive/Caller ID. Pick “Start New Conversations From” = Home to keep continuity.4) How do I switch the sending line in a specific message thread? - Open the conversation, tap the header (contact name/photo), and choose the line, or start a new message, then tap the line label above the keyboard to switch before sending.5) Why don’t I see both lines at once? - Ensure your iPhone supports Dual SIM and both lines are turned ON: Settings > Mobile Data > tap each plan > Turn On This Line. Older models may support only one eSIM plus one physical SIM, while newer models support two eSIMs.6) Can I keep two eSIMs active, no physical SIM? - On iPhone 13 and newer, yes—two active eSIMs are supported. US-model iPhone 14+ are eSIM-only devices and handle multiple eSIMs easily.Next step: Choose the right travel plan for your route on Destinations, then follow the steps above to set Mobile Data = Travel and Default Voice Line = Home before you fly.

31 Oct 2025

AirDrop & Nearby Share Safety: Prevent Drive‑By Transfers

Stuck in a crowded airport, train carriage or festival queue with Bluetooth on? That’s exactly when “drive‑by” file shares happen: strangers pushing images, contact cards or links to any nearby device that’s accepting transfers. This guide gives you practical, traveller‑first settings to block nuisance and risky shares on iPhone, iPad, Mac, Android (Quick Share/Nearby Share), Windows and Chromebooks. You’ll learn how to limit discoverability, require approval, use school/work modes, and practise sensible Bluetooth hygiene in crowds. Keep your device quiet, your name private, and your day disruption‑free.Whether you’re city‑hopping across Esim Western Europe, heading to the US on Esim North America or planning a single‑country stay with Esim United States, Esim France, Esim Italy or Esim Spain, set these protections before you reach the crowd. It takes under two minutes and prevents nasty surprises, from obscene images to phishing links disguised as “helpful” travel info.What’s the risk with “drive‑by” sharing?Nuisance or harassment: Unsolicited photos or videos—often explicit—pushed to anyone discoverable.Social engineering: Link or contact cards that mimic transport alerts or venue info.Privacy leakage: Your full name and device name can appear to everyone nearby.Corporate exposure: Travellers on work devices may breach policy if they accept unknown files.Distraction risk: Prompts popping up as you navigate boarding gates or ride‑share pickups.The fix isn’t to switch everything off forever. It’s to keep your device non‑discoverable by default, require approvals, and temporarily enable “Everyone” only when you actively share—with a strict timeout.Core principles for airdrop safety travelStay non‑discoverable by default: “Receiving Off” (Apple) or “No one/Hidden” (Android/Windows/ChromeOS).Use Contacts Only or Your devices when you must be visible; avoid “Everyone” unless absolutely necessary.Require approvals for all shares except your own devices.Keep your device identity generic (name and profile photo).Practise Bluetooth/Wi‑Fi hygiene in crowds; disable passive scanning where possible.For kids and corporate travellers, use system restrictions or management profiles.How to lock down AirDrop on iPhone and iPad (iOS 16+)AirDrop is safe when tightly scoped. Set it once, and use the “Everyone for 10 Minutes” option only when you’re actively sharing.Step‑by‑step: Set AirDrop to Contacts Only or Receiving OffOpen Control Centre (swipe down from the top‑right).Press and hold the network tile (with Wi‑Fi/Bluetooth).Tap AirDrop.Choose: - Receiving Off (most private), or - Contacts Only (balanced default). - Only choose Everyone for 10 Minutes when sending to a non‑contact in front of you.Pro tip: After any “Everyone for 10 Minutes” session, AirDrop auto‑reverts. Still, check it reset before entering a crowd.Disable “Bringing Devices Together” (NameDrop)This proximity feature makes sharing easier—but can invite bumps in crowded queues.Go to Settings > General > AirDrop.Toggle off Bringing Devices Together.Make your device name genericYour name is often visible when others look for devices.Settings > General > About > Name.Use something nondescript, e.g., “iPhone‑12” instead of your full name.Restrict AirDrop for kids or loaner devicesSettings > Screen Time.Content & Privacy Restrictions > Allowed Apps > toggle off AirDrop.This blocks AirDrop system‑wide until you re‑enable it. Great for school trips.How to harden AirDrop on Mac (macOS)When you travel with a Mac, keep it non‑discoverable unless actively sharing.Open Finder > AirDrop (left sidebar).At the bottom, set “Allow me to be discovered by” to: - No One (most private), or - Contacts Only (balanced).Disable Bluetooth from the menu bar if you don’t need it.Pro tip: Shares to yourself (same Apple ID) auto‑accept—safe and silent. Avoid “Everyone” in public places.Android: Secure Nearby Share/Quick ShareGoogle and Samsung unified sharing under “Quick Share” (formerly “Nearby Share”). Settings vary slightly by device, but the principles are the same.Step‑by‑step: Limit visibility and approvalsOn most Android devices (Pixel/OnePlus and many others): 1. Settings > Google > Devices & sharing > Quick Share. 2. Set Device visibility to: - No one (Hidden) by default, or - Contacts (safer than Everyone), or - Your devices (for seamless self‑sharing). 3. Ensure “Allow your devices to share without approval” is enabled only for your own devices. Require approval from everyone else.On Samsung: 1. Settings > Connected devices > Quick Share (or directly in Quick Share app). 2. Who can share with you: Contacts only or No one. 3. Turn off “Show my phone to others” unless you’re actively sharing.Quick toggle: - Pull down Quick Settings > long‑press Quick Share > adjust visibility. - If you must use “Everyone”, set it and immediately long‑press again to confirm it will time out (typically 10 minutes).Make your device identity boringSettings > About phone > Device name: Use “Pixel‑7” or similar.Google Account profile picture/name can appear to contacts—choose neutral options while travelling, if you like.Work profile (Android Enterprise)If your phone has a Work profile, your IT admin can disable Quick Share in the work context. Keep personal sharing off in crowds, and use your corporate channel (email/Teams/Drive) for work files. Business travellers can learn more on For Business and share this with IT via our Partner Hub.Windows and Chromebooks: Nearby sharing/Quick Share basicsWindows 10/11: Nearby sharingSettings > System > Nearby sharing.Set to Off or My devices only.Choose your save location (e.g., Downloads) and avoid auto‑opening received files.Pro tip: Rename your PC to something generic (Settings > System > About > Rename this PC).ChromeOS: Quick ShareSettings > Connected devices > Quick Share.Device visibility: No one or Contacts only.Disable “Open received files automatically” if available.Bluetooth and Wi‑Fi hygiene in crowdsMost local sharing relies on Bluetooth and Wi‑Fi for discovery. Tidy these up before stepping into a crowd.Turn off Bluetooth if you don’t need headphones or a watch right then.If you must keep Bluetooth on, keep AirDrop/Quick Share non‑discoverable.On Android: Settings > Location > Location services > disable Wi‑Fi scanning and Bluetooth scanning to reduce passive discovery beacons.Avoid public Wi‑Fi at pinch points (stations, stadium gates). Use mobile data instead—an eSIM like Esim Western Europe or Esim North America keeps you connected without exposure to crowded hotspots.Pro tip: If you must join venue Wi‑Fi, use a separate email for sign‑ups and avoid installing “Wi‑Fi helper” apps.Quick checklists for busy travellers30‑second pre‑crowd check (iPhone/iPad/Mac)AirDrop: Contacts Only or Receiving Off.NameDrop/Bringing Devices Together: Off.Device name: Generic.Bluetooth: Off if not needed; otherwise keep AirDrop restricted.Mac: Finder > AirDrop > No One or Contacts Only.30‑second pre‑crowd check (Android/Windows/ChromeOS)Quick Share/Nearby Share: No one/Hidden (or Contacts only).Require approval from everyone except your own devices.Device name: Generic.Bluetooth scanning and Wi‑Fi scanning: Off on Android.Windows Nearby sharing: Off or My devices only.When you actually need to share with a strangerMove a few steps aside from the crowd.Enable “Everyone for 10 minutes” (iOS) or “Everyone” with a timeout (Android/ChromeOS).Confirm the recipient’s device name and photo in person.Send the file and immediately reset visibility to Contacts Only/No one.Families, schools and business tripsFamilies: Use Screen Time to disable AirDrop on kids’ iPhones/iPads during trips. Teach “never accept from strangers” and how to set Receiving Off.Schools: Managed devices can block AirDrop/Quick Share during school events and trips. Share these settings with your IT lead.Businesses: Enforce Contacts Only or disable local sharing on managed devices for travellers. Build a standard “pre‑travel device checklist” and distribute it through your MDM. See For Business and our Partner Hub for deployment guidance.Practical traveller tips that stickKeep shares to known contacts. If someone nearby asks you to accept “their boarding pass” or “ride receipt”, decline and ask them to show it on their screen.Don’t tap unknown links from local shares; navigate to the airline, rail, or venue site/app yourself.Clear your Downloads/Files after trips; remove anything you don’t recognise.Use mobile data where possible. Regional passes like Esim Western Europe or single‑country options such as Esim France, Esim Italy, Esim Spain and Esim United States keep you online without risky public Wi‑Fi.FAQIs AirDrop safe to leave on while travelling?Yes, if set to Contacts Only or Receiving Off. Avoid “Everyone” except during a deliberate, brief share.What’s the Android equivalent of AirDrop?Quick Share (formerly Nearby Share). Set visibility to No one/Contacts, require approvals, and only use “Everyone” briefly.Can I stop my name appearing to strangers?Yes. Change your device name to something generic. On iPhone, Settings > General > About > Name; on Android, Settings > About phone > Device name; on Windows, rename your PC. Also disable photo/profile sharing where offered.How do I stop kids receiving random photos?On iOS: Screen Time > Content & Privacy > Allowed Apps > disable AirDrop. On Android: set Quick Share to No one and lock Settings behind a parental control app or Family Link.Does turning off Bluetooth stop all drive‑bys?It prevents discovery but may disrupt your watch/headphones and in some cases car keys. If you must keep Bluetooth on, set sharing visibility to Hidden/Contacts only.Will eSIM help with sharing safety?Indirectly. An eSIM keeps you on mobile data so you can avoid crowded public Wi‑Fi, reducing other exposure risks while travelling. Explore coverage by country and region via Destinations and options like Esim North America.Next stepPlan your route and set up your device before you go. Explore local coverage and pick the right travel eSIM on Destinations, then run the 30‑second safety checks above before you enter a crowd.

31 Oct 2025