iPad eSIM Setup (Wi‑Fi + Cellular): Supported Models & Steps

Blog

iPad eSIM Setup (Wi‑Fi + Cellular): Su...

iPad eSIM Setup (Wi‑Fi + Cellular): Supported Models & Steps

30 Oct 2025

Setup
iPad eSIM Setup (Wi‑Fi + Cellular): Supported Models & Steps

If you travel with an iPad, an eSIM is the cleanest way to get online without hunting for physical SIMs. This guide covers exactly which iPads support eSIM, how to install a travel eSIM step‑by‑step, and how to configure data, roaming and Personal Hotspot so your other devices can share the connection. We’ve written this with travellers in mind: fast, reliable setup, minimal faff.

A quick heads-up: eSIM works only on Wi‑Fi + Cellular iPad models, not Wi‑Fi‑only versions. Availability of eSIM can also vary by country or region (for example, eSIM on iPad is not offered in mainland China). Below you’ll find a simple model matrix, essential pre‑checks, and three install methods (QR code, activation code, and link). We’ll also share practical hotspot tips, how to switch or remove plans, and troubleshooting steps if something doesn’t behave.

When you’re ready to pick a plan, explore region and country options on our global Destinations, including popular picks such as Esim United States, Esim France, Esim Italy, Esim Spain, Esim Western Europe and Esim North America.

Quick check: does your iPad support eSIM?

  • Only Wi‑Fi + Cellular models support any mobile plan (physical SIM or eSIM).
  • eSIM support starts from specific generations (see lists below).
  • Mainland China: iPad models with eSIM are not offered; availability in Hong Kong and Macao depends on local carriers.
  • To confirm your model: Settings > General > About > Model Name and Model Number.

iPad models that support eSIM (Wi‑Fi + Cellular)

If your iPad is one of the following, it supports eSIM in most regions outside mainland China:

  • iPad Pro
  • 12.9‑inch (3rd generation and later: 2018, 2020, 2021, 2022 and newer)
  • 11‑inch (1st generation and later: 2018, 2020, 2021, 2022 and newer)
  • iPad Air
  • iPad Air (3rd generation, 2019)
  • iPad Air (4th generation, 2020)
  • iPad Air (5th generation, 2022) and later
  • iPad mini
  • iPad mini (5th generation, 2019)
  • iPad mini (6th generation, 2021) and later
  • iPad (standard)
  • iPad (7th generation, 2019)
  • iPad (8th generation, 2020)
  • iPad (9th generation, 2021)
  • iPad (10th generation, 2022) and later

Tip: Even on eSIM‑capable iPads, there may also be a physical nano‑SIM tray. You can use either a physical SIM or eSIM (one active plan at a time).

Models without eSIM (Apple SIM or physical SIM only)

These iPads do not support eSIM. Some include Apple SIM (removable or embedded), which Apple discontinued for new activations. You’ll need a physical SIM if you’re using these models.

  • iPad Pro 12.9‑inch (1st and 2nd gen: 2015, 2017)
  • iPad Pro 10.5‑inch (2017)
  • iPad Pro 9.7‑inch (2016)
  • iPad Air 2 (2014), iPad Air (1st gen, 2013)
  • iPad (5th gen, 2017; 6th gen, 2018)
  • iPad mini 3 (2014), iPad mini 4 (2015)

Note on Apple SIM: Apple ended remote provisioning for Apple SIM in 2022. If you relied on Apple SIM for travel data, upgrade to an eSIM‑capable iPad or use a physical SIM from a local carrier.

What you need before you start

  • A Wi‑Fi + Cellular iPad that supports eSIM (see lists above)
  • A stable Wi‑Fi connection for activation
  • iPadOS updated (Settings > General > Software Update)
  • An unlocked device (or a plan compatible with your iPad’s lock status)
  • Your eSIM details from your provider:
  • A QR code to scan; or
  • An activation code (SM‑DP+ address + Activation Code); or
  • An install link you can open on the iPad
  • Enough battery or a charger nearby

Pro tip: Travelling to multiple countries? Consider regional plans like Esim Western Europe or Esim North America so you don’t have to swap or re‑install between borders.

iPad eSIM setup: three easy methods

On iPad, the menu is “Mobile Data” (instead of “Cellular” on iPhone). Depending on iPadOS version, wording may be “Add eSIM” or “Add Data Plan”.

Method 1: Scan a QR code (fastest)

  1. Connect the iPad to Wi‑Fi.
  2. Go to Settings > Mobile Data.
  3. Tap Add eSIM or Add Data Plan.
  4. Choose Use QR Code. Aim the camera at the QR code.
  5. When the plan appears, tap Continue, then Add Data Plan.
  6. If prompted, label the plan (e.g., “Trip Europe”).
  7. Let the activation complete, then follow any on‑screen prompts.

If the camera can’t read the code, ensure good lighting and a steady hand. If it still fails, use Method 2 with the manual SM‑DP+ details.

Method 2: Install via activation code (SM‑DP+ address)

  1. Connect to Wi‑Fi and open Settings > Mobile Data.
  2. Tap Add eSIM or Add Data Plan.
  3. Select Enter Details Manually.
  4. Enter the SM‑DP+ Address and Activation Code exactly as provided. Leave Confirmation Code blank unless your provider gave one.
  5. Tap Next and wait for the plan to download.
  6. Add the plan and assign a label when prompted.

Tip: These fields are case‑sensitive. Copy/paste if possible to avoid typos.

  1. With Wi‑Fi on, open the install link provided by your eSIM seller directly on the iPad.
  2. Tap Allow when iPad prompts to add a mobile data plan.
  3. Follow the on‑screen steps to add and label the plan.

If you received the link on another device, email it to yourself or open it in a synced note on the iPad.

Configure data, roaming and Personal Hotspot

Once your plan is installed, configure it for travel.

Set your data plan and enable roaming

  1. Settings > Mobile Data.
  2. Under Mobile Data, ensure your new plan is selected for data.
  3. Tap Mobile Data Options > Data Roaming and turn it on if you’re using the plan outside its home country.
  4. If your provider gave APN settings, tap Mobile Data Network and enter the APN, Username and Password as instructed. Most travel eSIMs auto‑configure.

Pro tip: If you also have a physical SIM inserted, choose which plan provides data to avoid accidental roaming fees on the other plan.

Turn on Personal Hotspot

  1. Settings > Personal Hotspot (or Settings > Mobile Data > Personal Hotspot).
  2. Toggle Allow Others to Join.
  3. Set a strong Wi‑Fi password.
  4. Optional: turn on Maximise Compatibility (makes the hotspot more compatible with older devices by using 2.4 GHz; slightly reduces top speeds).

Hotspot travel tips: - Keep the iPad charging when tethering for long periods. - Place the iPad near a window for better signal. - If speeds drop, toggle Airplane Mode off/on or briefly turn the hotspot off/on to refresh the session. - Some plans restrict tethering; check your plan terms if the hotspot toggle is missing or won’t stay on.

Switching, pausing or removing eSIM plans

  • Temporarily turn a plan off: Settings > Mobile Data > tap the plan > turn off Turn On This Line.
  • Switch data between plans: Settings > Mobile Data > Mobile Data (select the plan for data).
  • Rename a plan: Settings > Mobile Data > tap the plan label > Change Label.
  • Remove a plan: Settings > Mobile Data > tap the plan > Remove Data Plan. Removing deletes the eSIM profile from your iPad. Keep your QR/activation details if you might need to reinstall (reinstallability depends on your provider’s policy).

Storage: iPad can store multiple eSIM profiles, but only one can provide data at a time.

Troubleshooting and pro tips

If something isn’t working, run through these checks:

  • “Add eSIM” is missing
  • Ensure you’re on a Wi‑Fi + Cellular model that supports eSIM.
  • Update iPadOS and restart.
  • If your iPad was bought in a region that restricts eSIM, the option may be unavailable.
  • QR code won’t scan
  • Clean the camera lens; brighten the screen showing the code.
  • Zoom the code on another device or print it larger.
  • Use manual entry via SM‑DP+ and Activation Code.
  • “Activation code invalid” or “Can’t add plan”
  • Confirm the SM‑DP+ address and Activation Code are entered exactly.
  • Check that your plan hasn’t already been installed on another device.
  • Try again on a stronger Wi‑Fi network.
  • “No Service” after install
  • Settings > Mobile Data > ensure the new plan is On and selected for data.
  • Turn on Data Roaming if abroad.
  • Check Mobile Data Network for custom APN details (if provided).
  • Update Carrier Settings: Settings > General > About (wait for any prompt).
  • Toggle Airplane Mode for 10 seconds; restart the iPad.
  • Hotspot won’t work
  • Verify your plan includes tethering.
  • Turn Personal Hotspot off/on; change the password.
  • On the device connecting, “Forget” the hotspot network and reconnect.
  • Use Maximise Compatibility for older laptops or cameras.
  • Still stuck?
  • Reset Network Settings: Settings > General > Transfer or Reset iPad > Reset > Reset Network Settings (you’ll need to rejoin Wi‑Fi).
  • Reinstall the eSIM with the original QR/activation details.

Pro tip for work trips: If you manage multiple iPads for a team, our For Business solutions simplify bulk eSIM delivery and spend control. Partners and resellers can onboard via the Partner Hub.

Travel picks for your iPad

Choose a plan by country or region to match your itinerary:

Tip: For road trips across borders, regional plans reduce SIM swaps and keep your iPad’s hotspot stable for your laptop and camera.

FAQ

  • Can I use an eSIM on a Wi‑Fi‑only iPad?
  • No. Only Wi‑Fi + Cellular iPads support any mobile data plan (physical SIM or eSIM).
  • Will my iPad get a phone number with an eSIM?
  • Travel eSIMs for iPad are typically data‑only. You won’t get voice calls or regular SMS. Use apps like FaceTime, WhatsApp, or Teams over data.
  • How many eSIMs can I store on an iPad?
  • Several, depending on model and iPadOS. Only one can be active for data at a time, but you can switch in Settings without re‑scanning the QR, provided the provider permits re‑activation.
  • Can I move an eSIM from my iPad to an iPhone (or another iPad)?
  • Not directly. You’ll usually need to install the eSIM fresh on the new device using the original QR/activation details, or request a transfer from your provider if supported.
  • Does Personal Hotspot work with an eSIM?
  • Yes, if your plan allows tethering. Enable it in Settings > Personal Hotspot and share the password with your other devices.
  • Is eSIM supported everywhere?
  • eSIM on iPad is not offered in mainland China, and local carrier support varies by market. Check coverage and compatibility for your destination before you travel.

Next step: Pick your plan by country or region on our global Destinations page and install your eSIM in minutes.

Read more blogs

Andes Highlights (3 Weeks): Peru–Bolivia–Chile–Argentina Connectivity

Andes Highlights (3 Weeks): Peru–Bolivia–Chile–Argentina Connectivity

Planning a south america itinerary 3 weeks through the high Andes? This route stitches together Peru’s Sacred Valley, Bolivia’s La Paz and Salar de Uyuni, Chile’s Atacama Desert, and northern Argentina’s quebradas or Mendoza wine country—often by long-distance bus and a couple of short flights. Connectivity is different at altitude: coverage is strong in cities but drops in high passes and salt flats; bus Wi‑Fi is patchy; border towns can be blackspots. The smart move is an eSIM with multi‑country coverage, backed by offline maps, offline translations, and a simple routine for crossing borders by bus without losing service. Below you’ll find a practical, connectivity-first itinerary; checklists to prep your phone, apps and documents; and on-the-ground tips for staying online where it matters: booking transport, hailing taxis, backing up photos, and navigating when the signal disappears.If you’re transiting via Europe or North America, you can also add a layover eSIM to stay connected door-to-door. Start with our country list on Destinations, then follow the steps, and you won’t waste time chasing SIM shops at 3,500 metres.The 3‑week Andes route at a glanceWeek 1: Peru (Cusco, Sacred Valley, Machu Picchu) - Fly into Cusco (or Lima then connect). - Base in Cusco; day trips to Pisac/Chinchero/Maras–Moray. - Train to Aguas Calientes; Machu Picchu visit; return to Cusco or continue to Puno/Lake Titicaca.Week 2: Bolivia and Chile (La Paz, Uyuni, San Pedro de Atacama) - Bus/collectivo via Copacabana to La Paz. - Fly or overnight bus to Uyuni. - 3‑day Uyuni–altiplano tour ending in San Pedro de Atacama (Chile).Week 3: Chile and Argentina (Atacama to Salta or Mendoza/Buenos Aires) - Choose: - North: San Pedro to Salta/Jujuy by bus; fly to Buenos Aires. - Or South: San Pedro–Calama flight to Santiago; bus or flight to Mendoza; onward to Buenos Aires.Connectivity notes (quick): - Cities: generally strong 4G/4G+; 5G in major hubs (Santiago, Buenos Aires). - Altitude/rural: expect long no‑signal stretches (Uyuni, altiplano passes, Paso Jama). - Bus Wi‑Fi: often advertised, rarely reliable. Plan to be offline onboard. - Border regions: networks switch; a multi‑country eSIM avoids sudden loss.eSIM vs local SIMs for a 4‑country tripFor a route with multiple borders and remote legs, eSIM wins on time and reliability.What a multi‑country eSIM gets you: - One plan across Peru, Bolivia, Chile, Argentina (check coverage per country on Destinations). - No passport/SIM registration queues at kiosks. - Keep your home number active on the physical SIM for calls/SMS codes. - Instant top‑ups if you burn data on photos or navigation.When a local SIM still helps: - Long stay in one country with heavy data use (e.g., a month in Buenos Aires). - Dead zones where a different local network performs better (rarely worth the hassle on a 3‑week pace).Practical approach: - Use an eSIM as your primary data line across all four countries. - If you find a specific local network far better in one region, add a cheap local SIM and keep the eSIM as backup.Device readiness checklist (before you fly)1) Check eSIM compatibility and SIM‑lock status on your phone.2) Buy and install your eSIM while on home Wi‑Fi. Keep a PDF/printed copy of the QR code.3) Label lines clearly (e.g., “eSIM Andes Data”, “Home SIM”).4) Turn on data roaming for the eSIM; leave roaming off for your home SIM to avoid charges.5) Set up dual‑SIM rules: data on eSIM; calls/SMS default to home SIM if needed.6) Download offline: Google Maps/Organic Maps for all target regions; language packs (Spanish at minimum); bus/air tickets; hotel confirmations.7) Cloud backups: set to upload on Wi‑Fi only; pre‑create shared albums for travel companions.8) Test tethering/hotspot with your laptop/tablet.If you’re transiting popular hubs, consider a short layover eSIM: - USA connections: add an Esim United States or a broader Esim North America.- Europe connections: Madrid/Barcelona? Use an Esim Spain. Paris or Rome? See Esim France and Esim Italy. Multi‑country layovers? Try Esim Western Europe.City‑by‑city connectivity notesCusco & the Sacred Valley (Peru)Coverage: Good in Cusco city; variable in high villages (Maras/Moray) and along Inca Trail approaches.Tips: Download Sacred Valley maps offline; pin viewpoints and ruins. most taxis use WhatsApp—save your accommodation’s number.Machu Picchu/Aguas Calientes: Patchy to none at the citadel. Upload your photos later; don’t rely on live ticket retrieval.Lake Titicaca: Puno and CopacabanaPuno: Reasonable 4G; bus terminals crowded—screenshot QR tickets.Crossing to Copacabana: Expect a signal drop around the border; have directions saved offline.La Paz (Bolivia)Good urban 4G; the cable car network has decent signal but tunnels do not.Yungas/“Death Road” tours: Mountain valleys cause dead zones—share your emergency contacts with the operator, carry a charged power bank, and don’t plan remote calls.Uyuni and the Altiplano (Bolivia to Chile)Uyuni town: OK 4G; ATMs finicky—use Wi‑Fi for banking apps.Salt flats/lagunas: Assume offline for most of the 3‑day tour. Guides often carry satellite phones; agree a pickup time/place in San Pedro and preload your map route.San Pedro de Atacama (Chile)Town: Solid 4G; accommodations often have Wi‑Fi but speeds vary.Geysers, Valle de la Luna: Offline navigation essential; sunrise trips start before mobile networks wake up in some areas.Salta/Jujuy or Mendoza/Buenos Aires (Argentina)Salta/Jujuy: Good city coverage; quebradas have long no‑signal sections.Mendoza: City 4G/5G; vineyards outside town can be patchy.Buenos Aires: Strong 4G/5G; ideal for cloud backups and large downloads before you fly home.Border crossings by bus: step‑by‑stepThe big ones on this route: Peru–Bolivia (Puno/Copacabana), Bolivia–Chile (Uyuni–San Pedro via Hito Cajón), Chile–Argentina (Paso Jama to Salta or Los Libertadores to Mendoza).How to keep service and sanity:1) The day before:- Top up your eSIM data.- Confirm your plan includes both countries you’re entering/leaving.- Download offline maps for both sides of the border and your town of arrival.- Save bus company WhatsApp and terminal address offline.2) On departure morning:- Keep a paper copy or offline PDF of tickets, insurance, and accommodation proof.- Charge phone and power bank; pack a short cable in your daypack.3) On the bus:- Don’t count on bus Wi‑Fi. Keep your eSIM as primary, but expect drops near mountain passes.- If your phone supports it, enable “Wi‑Fi calling” for later when you reach accommodation Wi‑Fi.4) At the border posts:- Data may be unavailable. Keep QR codes and booking numbers offline.- After exiting one country and entering the next, toggle Airplane Mode off/on to re‑register on the new network.- If the eSIM doesn’t attach, manually select a network in Mobile Settings.5) Arrival:- Send your accommodation a quick WhatsApp when you’re back online.- Recheck your eSIM’s data roaming is on; confirm you’re on an in‑country network, not a weak roaming partner.Pro tips: - Dual profiles: If your eSIM allows, keep a secondary profile for a different network in the same country—helpful in border towns.- Cash buffer: Some border terminals don’t accept cards; download a currency converter for offline use.Offline survival kit (5‑minute setup)Maps: Download regions for Cusco, Sacred Valley, Puno, La Paz, Uyuni, San Pedro, Salta/Jujuy or Mendoza, and Buenos Aires.Translations: Download Spanish for offline use; add phrasebook favourites (bus tickets, directions, dietary needs).Documents: Save PDFs of passports, tickets, hotel addresses; star them for quick access.Rides: Screenshots of pickup points; pin bus terminals and hotel doors.Entertainment: Podcasts and playlists for long bus legs, set to download on Wi‑Fi only.Altitude and your tech: what changesCoverage gaps lengthen: Fewer towers at high altitude; valleys can block signal. Assume offline on remote excursions.Batteries drain faster in cold: Keep your phone warm and carry a power bank (10,000–20,000 mAh).Hotel Wi‑Fi may be congested: Schedule big uploads (photo backups, app updates) for big-city stays like Santiago or Buenos Aires.GPS still works offline: Your blue dot shows on offline maps without data—preload everything.Data budgeting for 3 weeksTypical traveller usage across this route: - Messaging/Maps/Bookings: 0.2–0.5 GB/day- Social and photo sharing: 0.3–0.7 GB/day- Occasional video calls/streaming: 0.5–1.0 GB/dayFor a mixed-use trip, plan 15–25 GB for 3 weeks. Heavy creators should double it and upload over hotel Wi‑Fi when possible. If you work remotely, consider a higher‑capacity plan and a backup eSIM; see our guidance on For Business.Practical route with transport and connectivity cuesDays 1–4 Cusco base: Strong city signal; day trips may be spotty—go offline-ready.Days 5–6 Machu Picchu: Expect no service at the ruins; sync tickets ahead.Days 7–8 Puno to La Paz via Copacabana: Border signal drop; re‑register networks after crossing.Days 9–11 Uyuni tour to San Pedro: Treat as offline; charge nightly; carry spare cables.Days 12–14 San Pedro: Stable in town; tours offline; top up data before Paso Jama.Days 15–17 Salta/Jujuy or Mendoza: Good urban 4G; rural patches are offline.Days 18–21 Buenos Aires: Strongest connectivity of the trip; clear your uploads and map downloads for the flight home.Partnering and stopover extrasHospitality and tour operators in the Andes: help your guests stay connected—explore co‑branded solutions via our Partner Hub.Transatlantic flyers: test your eSIM setup on a layover with an Esim United States or Esim Western Europe before hitting high-altitude blackspots.FAQs1) Do I need a local SIM in each country?No. A multi‑country eSIM covering Peru, Bolivia, Chile and Argentina is simpler and works well for a 3‑week pace. Consider a local SIM only if you’ll spend longer in one country and want the absolute best regional coverage.2) Will my WhatsApp number change with an eSIM?No. WhatsApp is tied to your registered number, not your data line. Keep your home SIM active for voice/SMS (roaming off if you wish), and use the eSIM for data—WhatsApp continues as normal.3) Can I hotspot to my laptop or camera?Yes. Enable tethering on your eSIM. Mind your data: cloud backups and OS updates can burn gigabytes—set them to Wi‑Fi only or schedule in big cities.4) What if there’s no signal on the Uyuni/Atacama legs?That’s expected. GPS still works offline. Pre-download maps and translations, carry a power bank, and sync plans with your tour operator before departure.5) Will I get roaming charges at borders?If you’re using a multi‑country eSIM with coverage in both countries, you won’t incur extra roaming fees from your home carrier. Keep roaming off on your home SIM to avoid accidental use.6) I’m connecting via Europe or the US—worth getting a layover eSIM?Yes. It’s an easy way to test your setup and stay reachable. Try Esim North America or country options like Esim Spain, Esim France, or Esim Italy for common hubs.Next step: Browse South America coverage options and build your plan on Destinations.

31 Oct 2025
eSIM Compatible Phones (Updated 2025): iPhone, Samsung, Pixel & More

eSIM Compatible Phones (Updated 2025): iPhone, Samsung, Pixel & More

Travellers are ditching plastic SIMs for eSIMs because they’re fast to set up, kinder to your phone’s SIM tray, and usually cheaper than roaming. But eSIM support varies by model and region, and not every “dual-SIM” phone actually supports a digital SIM. This 2025 guide gives you the definitive compatibility picture: quick checks you can run in under two minutes, a brand-by-brand device matrix, and practical install tips that avoid airport Wi‑Fi panic. If you’re planning a trip to the US, Europe or beyond, we’ll also point you to dependable regional plans like Esim United States, Esim Western Europe and Esim North America.Key point: model names alone aren’t enough. Variants from different countries or carriers can enable or disable eSIM. Use the quick checks below to confirm your exact device, then pick a plan from our global Destinations page.The fastest way to confirm eSIM support (2‑minute check)Step 1: Find your EIDiPhone: Settings > General > About. Look for “EID”.Android (Pixel/Samsung/others): Settings > About phone (or Status). Look for “EID”.Or dial *#06# on most phones. If you see an EID, your hardware supports eSIM.Step 2: Look for an “Add eSIM” optioniPhone: Settings > Mobile Data > Add eSIM.Samsung: Settings > Connections > SIM manager > Add eSIM.Pixel/Android: Settings > Network & Internet > SIMs > + Add eSIM.Step 3: Update and unlockInstall the latest iOS/Android update.Ensure the phone is network unlocked for travel eSIMs.Step 4: Dual SIM expectationsMost recent iPhones, Pixels and flagships support two lines active (one or two eSIMs depending on model). Mid‑range Androids may allow only one eSIM active alongside a physical SIM.Pro tip: No EID showing? Your model or region variant likely doesn’t support eSIM, or the feature is disabled by firmware/carrier.eSIM‑compatible phones in 2025: the definitive listModel availability and eSIM features can vary by region and carrier firmware. Use this as a guide, then run the quick checks above on your exact handset.Apple iPhone (global leaders for eSIM)iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max – eSIM supported; US models are eSIM‑only (no SIM tray).iPhone 15 family – eSIM supported; US models are eSIM‑only.iPhone 14 family – eSIM supported; US models are eSIM‑only.iPhone 13, 12, 11 families – eSIM supported.iPhone XS, XS Max, XR – first iPhones with eSIM.iPhone SE (2nd gen 2020, 3rd gen 2022) – eSIM supported.Notes for travellers: - iPhone 13 and newer can run two eSIMs simultaneously (or one eSIM + one physical SIM on non‑US models). - iOS allows storing multiple eSIM profiles and switching as you travel.Samsung Galaxy (flagships and many A‑series)Galaxy S24 / S23 / S22 / S21 / S20 series – eSIM supported on most global variants.S20 FE: eSIM availability depends on edition/region; later “2022” models added eSIM in many markets.Galaxy Z Fold and Z Flip (all generations since eSIM was introduced) – eSIM supported.Galaxy Note20 / Note20 Ultra – eSIM supported on most variants.Galaxy A‑series (region‑dependent): A55, A54, A35, A34, A25 5G, A15 5G and newer mid‑range models often include eSIM in Europe/Asia; some US carrier‑branded units disable it.Notes for travellers: - eSIM on Samsung can be region/carrier dependent. Check Settings > Connections > SIM manager. - Many newer models support multiple stored eSIMs; simultaneous active lines vary by device/firmware.Google Pixel (Android’s eSIM reference)Pixel 9 / 9 Pro / 9 Pro Fold – eSIM supported.Pixel 8 / 8 Pro – eSIM supported; dual eSIM possible on recent Android builds.Pixel 7 / 7 Pro / 7a – eSIM supported.Pixel 6 / 6 Pro / 6a – eSIM supported.Pixel 5 / 4 / 4a – eSIM supported.Pixel 3 / 3a – eSIM supported in many regions; some carrier variants limit it.Pixel Fold – eSIM supported.Notes for travellers: - Pixel 2 had a limited eSIM implementation (mostly Google Fi); treat it as non‑universal.- Keep Android 13+ for the smoothest eSIM experience.Other Android brands (selected models with widespread eSIM support)Because eSIM on these brands varies more by market and firmware, treat this as “supported in many regions” and confirm on your device with the EID check.OnePlus: 11, 12, 13 – eSIM on many EU/IN/global variants; earlier models largely lacked eSIM.Sony Xperia: 1 V/VI, 5 V, 10 V/VI – eSIM widely supported.Motorola: Razr (2019 onwards), Razr 40/50 series; Edge 30/40 families and newer – many variants support eSIM.Xiaomi: 13 / 13 Pro / 13T Pro, 14 / 14 Pro / 14 Ultra – growing eSIM support by region; confirm locally.OPPO: Find X5/X6/X7 series; Reno 8/10 series – selected regional variants support eSIM.Huawei: Selected P and Mate series (e.g., P40/P50/P60, Mate 40/50) support eSIM in some markets.Nothing: Phone (1) and Phone (2) support eSIM.Fairphone: Fairphone 4 and 5 support eSIM.Nokia/HMD: Nokia X30 5G, XR21 and some enterprise models support eSIM.Pro tips: - Mid‑range and carrier‑branded Androids are the most inconsistent. Always check for EID and an “Add eSIM” option. - If your dual‑SIM tray has two physical SIM slots, eSIM may still be supported—but it’s not guaranteed.iPhone vs Samsung vs Pixel on the roadiPhoneBest overall consistency. US iPhone 14/15/16 are eSIM‑only, which is ideal for travel plans.iOS makes it simple to label lines (e.g., “Japan Data”) and pick a default for data/voice.Can store multiple profiles; two lines active on iPhone 13 and newer.SamsungPowerful SIM manager with clear toggles for data/voice/roaming.Watch for model/region variance on A‑series and FE models.If “Add eSIM” is missing, update software; some regions enable it via firmware.PixelClean implementation with helpful prompts; strong dual‑SIM standby on recent models.Updating to the latest Android build often unlocks dual eSIM improvements.Great for quick QR installs before you fly.How to install a Simology eSIM (step‑by‑step)Do this on Wi‑Fi before you travel.1) Buy a plan- Choose your country or region on Destinations. For multi‑country trips, consider Esim Western Europe or Esim North America.2) Open your QR or activation details- Keep the email/app screen open on another device, or print the QR.3) Add the eSIM- iPhone: Settings > Mobile Data > Add eSIM > Use QR Code.- Samsung: Settings > Connections > SIM manager > Add eSIM > Scan QR.- Pixel: Settings > Network & Internet > SIMs > + Add eSIM.4) Label and set defaults- Name it (e.g., “Trip EU”) and set it as the Mobile Data line. Keep your primary line for calls/texts if needed.5) Enable Data Roaming on the travel eSIM- Required for regional packs like Esim France, Esim Italy or Esim Spain.6) Test before departure- Toggle the eSIM off/on and check APN auto‑config. You’re ready.Pro tips: - Arriving late? Install the eSIM at home so it activates instantly on landing.- Use regional bundles to avoid switching plans mid‑trip (e.g., Esim United States for the US or Esim Western Europe for multi‑country EU travel).- Business travellers: centralise purchasing and compliance with For Business.Troubleshooting and gotchasNo “Add eSIM” optionUpdate software; reboot; check if the phone is carrier‑branded (some carriers hide the menu on mid‑range models).No EID foundYour device likely lacks eSIM hardware or the variant disables it.QR won’t scanEnter activation details manually. Ensure you’re on Wi‑Fi and any VPN is off.“Maximum eSIMs reached”Delete old, unused eSIM profiles to free a slot.Data not working on arrivalConfirm the travel eSIM is set as the Mobile Data line and Data Roaming is on. Reboot once after network attach.Locked phoneTravel eSIMs require an unlocked device. Contact your carrier to request unlock before you fly.Partners and resellers: streamline onboarding and co‑branded offers via the Partner Hub.FAQHow do I know if my phone is eSIM capable?Check for an EID in Settings (or dial *#06#) and an “Add eSIM” option in your SIM settings. If both exist, your phone supports eSIM. If either is missing, it likely doesn’t.Do I need an unlocked phone to use a travel eSIM?Yes. Most travel eSIMs, including Simology plans, require an unlocked device. A carrier‑locked phone generally only accepts that carrier’s eSIMs.Can I run two lines at the same time?Most modern iPhones (13 and newer) and recent Pixels/Samsungs support two active lines (e.g., personal number plus travel data). Some mid‑range Androids limit you to one active eSIM at a time.How many eSIMs can I store?It varies by model. Recent iPhones and Pixels can store multiple eSIM profiles (often 5–10 or more) but typically allow only two lines active simultaneously. You can switch profiles in Settings.Can I move an eSIM to a new phone?Some providers support eSIM transfer in‑app or via QR reissue, but many treat eSIMs as one‑device only. Plan to install a fresh eSIM on your new phone.Will eSIM drain my battery faster?Not noticeably. Running two lines can use slightly more power, but modern radios manage this efficiently. Most users won’t see a meaningful difference.Next step: Confirm your phone with the quick checks above, then pick your destination plan on Destinations.

30 Oct 2025
Multi‑Network Smart Switching for Partners: SLA Uplift & Fewer Support Tickets

Multi‑Network Smart Switching for Partners: SLA Uplift & Fewer Support Tickets

Modern travellers expect connectivity that “just works”, anywhere, anytime. For partners and wholesalers, that means delivering resilient mobile data that rides over multiple networks and quietly switches when conditions degrade. Multi‑network smart switching turns a single‑carrier promise into a carrier‑diverse service level, lifting uptime, lowering latency and slashing support noise when customers cross borders or move between urban and rural cells. This article explains how smart switching works, what uplift to expect in real numbers, and how to frame it in your sales deck. We’ll cover SLA design, implementation checklists, and practical measurement so you can prove more minutes of service delivered, fewer “no service” moments and faster apps. If you sell travel eSIM across regions such as Esim Western Europe and Esim North America, smart switching is the most efficient path to better SLAs and fewer escalations—without asking end users to fiddle with settings or swap profiles.What is multi‑network smart switching?Multi‑network smart switching is a policy‑driven capability embedded in the SIM/eSIM stack that selects the best available network at any moment, based on real‑time quality signals such as:Radio availability and signal qualityAttach success/failure and PDP/PDN session stabilityLatency to key targets (e.g., DNS, CDN edges)Packet loss and jitterCommercial rules (whitelists/blacklists, cost ceilings, fair use)Instead of pinning a device to a single carrier, your eSIM has access to multiple MNOs/MVNOs in each country. A lightweight policy engine monitors quality and triggers network reselection or profile steering if the current path degrades.For travellers, the experience is invisible: the device stays online as they move from, say, Paris to Barcelona (see Esim France and Esim Spain), or from New York to California (Esim United States). For partners, it’s the simplest way to add resilience and meet enterprise‑grade expectations across our Destinations.Why smart switching matters for SLAsQuantifying uptime upliftIf you rely on a single network with 99.0% monthly availability, that’s about 7 hours and 18 minutes of downtime per month. With access to two independent networks of similar quality, the combined availability approaches:Combined availability ≈ 1 − (1 − A1) × (1 − A2)Example with A1 = 0.990 and A2 = 0.990 → 1 − 0.01 × 0.01 = 99.99%Real‑world failures are not perfectly independent (storms, fibre cuts, or national outages can hit multiple networks), so a conservative planning assumption is:Single‑network monthly downtime: 200–450 minutes (varies by market granularity)Dual/triple‑network smart switching downtime: 5–30 minutesPractical uplift: 10× to 40× less downtime, translating into 99.95%–99.99% delivered availabilityEven a modest two‑network design with correlated risks typically lifts availability from 99.0–99.5% to 99.95%+. Across an active travel cohort, that’s hundreds of “saved” online minutes per 1,000 user‑days.Latency and app performanceChoosing the lowest‑latency path matters for cloud apps, maps and messaging. Smart switching prefers networks with:Local or regional breakout rather than home‑routed trafficHealthier peering to major CDNs and collaboration suitesLower radio congestion in the momentObserved results partners can expect:EU intra‑region p95 latency improvements of 20–40% when switching to a better‑peered MNO (e.g., from 120–160 ms to 70–110 ms)Within the US, p95 latency reductions of 15–30% by avoiding congested areas or leveraging a stronger regional carrier10–25% reduction in time‑to‑first‑byte for common mobile web flowsFor many travel use cases, perceived speed is as valuable as raw throughput. Lower p95 latency (not just averages) is what keeps video calls and maps usable.Support ticket reductionMost travel connectivity tickets cluster into a few buckets:No service / can’t attach“Data is slow”Intermittent dropsAPN/profile confusionSmart switching prevents the first three by auto‑moving away from bad cells, degraded cores or poorly performing peering. Typical reductions once deployed:30–50% fewer “no service” tickets20–35% fewer “slow data” tickets40–60% drop in intermittent dropouts, especially at cell edges and transit hubsFewer incidents means lower support cost per account and happier travellers—reflected in higher CSAT/NPS.How smart switching works in practiceMulti‑MNO access per country: eSIM profiles grant access to multiple carriers in markets covered by products such as Esim Western Europe, Esim North America, and country packs like Esim Italy.Policy‑based steering: The eSIM stack and partner platform set preferred/forbidden networks and thresholds for switching (e.g., persistent packet loss, repeated attach failures, or sustained high latency).Fast, graceful failover: Devices usually reselect within seconds when a better cell is available; full context rebuild may take longer when moving between cores. End users typically experience a brief blip rather than an outage.Compliance‑aware: Partners can restrict selection to specific networks for regulatory or contractual reasons, while still maintaining diversity where permitted.Note: switching behaviour can vary by device OS and modem firmware. Always include device diversity in your test plan.Designing a multi network switching SLAA robust multi network switching SLA should define:Coverage scope: Countries/regions and included technologies (4G/5G NSA/SA; 2G fallback where applicable).Availability target: e.g., 99.95% monthly at the service edge (successful data session and reachability to defined targets).Latency: p95 thresholds to strategic targets (e.g., 100 ms within region), plus packet loss/jitter bounds.Attach success: e.g., >99.8% attach success within three attempts.Time‑to‑recover: e.g., recovery within 60 seconds from RAN loss where another network is available.Maintenance windows: whether counted or excluded.Measurement method: synthetic probes, device telemetry, or both; time‑zone and aggregation rules.Credits/remedies: aligned to impact, not just percentage figures.Practical baseline examples to include in proposals:Expected availability: 99.95–99.99% across Tier‑1 markets; 99.9–99.95% in challenging geographies.p95 latency targets: 70–110 ms in Western Europe; 60–120 ms across the United States; 90–140 ms cross‑border in North America.Typical downtime minutes avoided vs. single‑network: 150–400 minutes per month saved at scale.Caveat: When multiple carriers share common infrastructure (e.g., the same backhaul or data centre), failures may correlate. Build safety margins into your SLA targets and document assumptions.Implementation checklist for partners1) Select the right products and footprint - Map travel routes against our Destinations. - Choose regional packs where roaming density is high, like Esim Western Europe. - For US‑heavy travel, include Esim United States and broader Esim North America.2) Define policy and constraints - Whitelist preferred networks per country; blacklist known weak cells where needed. - Set switching thresholds (attach retries, packet loss %, p95 latency ceilings). - Add compliance rules (e.g., force domestic breakout for specific roles).3) Prepare devices - Validate APN and OS versions; ensure eSIM installation flow is clear. - Test both iOS and Android, including dual‑SIM scenarios.4) Run a structured field test - Build a route‑based test matrix (airports, transit, hotels, rural). - Collect p95 latency, packet loss, attach success, and time‑to‑failover.5) Operationalise monitoring - Set up synthetic probes in key cities (e.g., Paris, Milan, Madrid, New York). - Alert on threshold breaches and trigger automated steering adjustments.6) Update support playbooks - Replace “toggle airplane mode” scripts with “smart switching check” steps. - Categorise tickets to isolate improvements in the first 60 days.7) Close the SLA loop - Publish monthly reports with uptime minutes delivered, p95 latency, and ticket volume changes. - Share before/after comparisons with enterprise customers.Pro tip: Keep policy simple to start. Two‑tier thresholds (degradation and failover) often outperform complex rule stacks and are easier to explain in an SLA.Measuring outcomes: before/after that executives understandTrack and report the metrics that translate to traveller experience and support load:Downtime minutes per 1,000 user‑daysp95 latency by country and by hour of dayAttach success rate and PDP/PDN drop rateTime‑to‑failover when quality degradesTicket volumes by category and severityCSAT/NPS for connectivity over timeBenchmarks seen after rollout:Downtime per 10,000 user‑days: from 500+ minutes down to 50–150 minutesp95 latency: 20–40% reduction in Western Europe and 15–30% across the USAttach failure rate: 25–50% reductionSupport tickets: 35–55% reduction overall; first‑response times down by 20–30%These results form the backbone of your SLA narrative and your sales proof points.How to position smart switching in your sales deckStructure your pitch around outcomes, not internals:Headline: “Always‑on travel connectivity with carrier diversity. 99.95%+ delivered availability. Auto‑failover in seconds.”Visual: Route map with overlapping carrier coverage; a call‑out of “no single‑carrier dependency”.Benefits slide:10–40× fewer downtime minutes vs. single‑network roaming20–40% lower p95 latency in key markets35–55% fewer support ticketsZero user action required; seamless device experienceProof points:Before/after metrics from a pilot on Esim Western EuropeUS results from Esim United StatesSLA summary: Clear targets for availability, latency, time‑to‑recover, and measurement approachBuyer‑friendly close: “Start with a 60‑day pilot, monitored and co‑managed.”Pro tip: Put p95 latency on the same slide as collaboration app performance (e.g., “Teams/Meet calls stay stable at p95 < 110 ms”). Stakeholders can connect the dots instantly.Where smart switching helps mostFrequent‑traveller teams moving between EU countries (Paris–Milan–Barcelona) with Esim France, Esim Italy and Esim SpainUS‑centric road warriors relying on robust coverage across states with Esim North AmericaPop‑up retail and events that cannot tolerate single‑cell congestionField service in rural areas where one network often outperforms othersCritical apps that are latency‑sensitive (payments, UCaaS, live translation)Pro tips for smooth operationsKeep the APN consistent across products to simplify device setup and MDM policies.Monitor p95, not just averages. It’s where user pain lives.Maintain a minimal “known good networks” list per country and review quarterly.Educate users that brief blips can occur during switching; the system is protecting them from longer outages.Use synthetic probes near airports and train stations—congestion there is a leading indicator for broader issues.FAQQ: How is smart switching different from traditional roaming steering?A: Traditional steering prioritises a preferred roaming partner for commercial reasons. Smart switching prioritises real‑time quality and resilience, moving between multiple networks to protect the user experience and SLA.Q: Will frequent switching drain battery?A: Properly tuned policies avoid flapping. Devices remain attached until quality falls below thresholds, then reselect. In practice, battery impact is negligible compared to the gains from avoiding repeated manual toggling or stalled apps.Q: Does the IP address change when the device switches?A: It can. Moving to a different core or breakout may change IP. For most travel use cases that’s fine. If you require session persistence, design app logic to handle IP changes or pin traffic via a corporate VPN.Q: Can we restrict networks for compliance or cost?A: Yes. You can whitelist/blacklist networks per country while preserving diversity within the allowed set. Document these constraints in the SLA so expectations remain clear.Q: What happens in areas with limited technology (e.g., only 4G available)?A: Smart switching still helps by selecting the strongest available 4G cell and the best‑performing core. Where 5G is present, policies can prefer 5G where it improves latency and stability.Q: How does this work across regions like Western Europe and North America?A: Regional eSIMs such as Esim Western Europe and Esim North America include multi‑MNO access in each country, enabling the same smart switching behaviour as you cross borders.The partner advantageMulti‑network smart switching converts a roaming product into a resilient service with measurable SLA uplift. It protects travellers from localised outages, evening congestion and poor peering, while reducing your support burden. With clear SLA targets, a simple policy, and disciplined measurement, you can prove value fast—and price accordingly.Next step: Explore packaging, SLAs and co‑marketing materials in our Partner Hub. If you’d like to discuss enterprise rollouts, visit For Business.

30 Oct 2025