Keep WhatsApp & iMessage While Using a Data eSIM Abroad

30 Oct 2025

Travelling with a local data eSIM is the cheapest way to stay online. The worry: losing your WhatsApp or iMessage identity, missing OTPs, or triggering costly SMS activations. The good news is you can keep your home phone number on WhatsApp and iMessage while using a travel eSIM purely for data. The trick is line assignment: leave your home line for calls/SMS, set the eSIM as your data line, and avoid unnecessary reactivation prompts.

This guide shows you exactly how to do it on iPhone and Android, with step-by-step settings, what to tap when apps say “SIM changed”, and how to prepare backup codes so you’re never locked out. You’ll also find dual‑SIM examples for common trips and a quick troubleshooting section. If you’re heading to the US, Europe or beyond, pick an eSIM from Destinations and follow this playbook to keep your number, cut roaming costs, and stay reachable.

The simple rule: keep your number, switch your data

Keep your home SIM/eSIM active for calls and SMS (don’t remove it unless you’re certain you won’t need OTPs or calls).
Add a travel eSIM and assign it as the “Mobile Data”/“Preferred data” line.
Turn off data roaming on your home line to prevent surprise charges.
WhatsApp and iMessage will continue to use your home number over the travel eSIM’s internet connection.

Why this works: - WhatsApp is tied to the number you registered with, not the SIM providing data. As long as the app stays logged in and your device has internet, your WhatsApp identity stays the same. - iMessage and FaceTime can send/receive via your phone number and/or Apple ID email. Once activated on your number, iMessage continues to work over any internet connection.

Pre‑trip checklist (10 minutes now, hours saved later)

Confirm your phone is unlocked and supports eSIM/dual‑SIM.
Install critical updates for iOS/Android, WhatsApp, and Messages before you go.
Activate iMessage/FaceTime on your home number while still at home. Do not toggle iMessage off/on while abroad (it can trigger a paid international SMS).
WhatsApp:
Confirm you’re registered on your home number.
Enable two‑step verification and set your 6‑digit PIN with a recovery email.
Trigger a fresh chat backup (iCloud on iPhone, Google Drive on Android).
Two‑factor authentication:
Add an extra trusted number to your Apple ID, and note how to “Get Verification Code” from Settings offline.
For Android/Google services, generate and print/save your Google backup codes offline.
Add recovery methods for banks and key apps that send OTPs.
Decide your eSIM plan: single‑country or regional.
US trip: see Esim United States.
Western Europe: see Esim Western Europe or country packs like Esim France, Esim Italy, Esim Spain.
Multi‑country across US/Canada/Mexico: Esim North America.
Save your eSIM QR/activation details offline (PDF/screenshot in a secure note).
Label your lines clearly in your phone (Home vs Travel) to avoid slip‑ups.

Pro tip: Keep mobile data off on your home line. SMS usually works without data; you’ll still receive OTPs if your home number has roaming enabled for SMS. Check costs with your operator.

Set up on iPhone (dual‑SIM/eSIM)

1) Install and label your eSIM

Settings > Mobile Service (or Cellular) > Add eSIM.
Scan your eSIM QR or use the provider app.
When asked to label, name them clearly: - Primary or Home = your home number - Travel = your eSIM data plan

2) Assign lines for data, calls and SMS

Settings > Mobile Service: - Default Voice Line: Primary/Home (so your calls show your home number). - iMessage & FaceTime Line: Choose Primary/Home.
Mobile Data: - Set Mobile Data = Travel (eSIM). - Turn off Allow Mobile Data Switching (keeps data strictly on the eSIM).
For the Primary/Home line: - Turn off Data Roaming. - Leave the line enabled so SMS and calls can reach you.

Pro tip: For contacts who must always use your home number, set their per‑contact “Preferred Line” to Primary in the Contacts app.

3) iMessage and FaceTime settings that stick

Settings > Messages: - iMessage: ON (already activated on your home number before travel). - Send & Receive: Tick your phone number and Apple ID email. Set “Start New Conversations From” to your phone number if you want continuity, or your Apple ID email if your number can’t activate while abroad.
Settings > FaceTime: - Tick your phone number and Apple ID. Ensure your home number is active here too.

Avoid toggling iMessage or FaceTime OFF/ON while abroad. It can trigger a fresh activation SMS charged at international rates by your carrier.

4) WhatsApp: keep the same number

Open WhatsApp > Settings > Account > Two‑step verification: ensure it’s ON.
Do not use “Change Number” unless you are permanently changing numbers.
If WhatsApp shows “Did you change your number?” after it detects a SIM change, tap “No”.
If asked to re‑verify, only proceed if you can receive the SMS/voice call to your home number. Otherwise, force‑quit and reopen when you have signal for your home line or Wi‑Fi Calling.

Pro tip: Link WhatsApp Web/Companion on your laptop or tablet before you fly so you can keep chatting even if your phone is briefly offline.

Set up on Android (dual‑SIM/eSIM)

Android menus vary by brand, but the flow is similar.

1) Install and label your eSIM

Settings > Network & Internet > SIMs (or Connections > SIM Manager) > Add eSIM.
Label clearly: SIM 1 = Home, eSIM/SIM 2 = Travel.

2) Assign data, calls and SMS

Preferred SIM for:
Mobile data: Travel.
Calls: Home.
SMS: Home.
Turn off Data Roaming on the Home SIM.
Keep the Home SIM enabled so you can receive SMS/OTP.

Pro tip: Some Android phones let you choose SIM per contact in the dialler/Contacts. Set important contacts to always use your Home line.

3) Messages, RCS and Google account sanity checks

Google Messages (RCS chat features) may try to verify your number via SMS when re‑enabled. If prompted abroad, choose “Not now” to avoid a charge, or connect to Wi‑Fi with the Home SIM able to send one activation SMS.
Generate and save Google backup codes before you go, and add a recovery email/phone.

4) WhatsApp: same number, new data

Confirm WhatsApp is registered to your Home number.
Keep two‑step verification ON with your 6‑digit PIN.
If you see a SIM‑change prompt, choose “No” unless you’re truly changing numbers.
Re‑verification requires SMS/voice to your Home number; do this only when you have coverage and are comfortable with any roaming SMS cost.

Common prompts and how to respond

WhatsApp “Change number?” detected:
Choose “No”. You’re only using a different data connection, not changing identity.
iMessage wants to reactivate:
Don’t toggle iMessage/FaceTime while abroad.
If it deactivates unexpectedly, you can temporarily use your Apple ID email for send/receive, or reactivate knowing one international SMS may be charged by your carrier.
Google Messages RCS activation:
Select “Not now” and activate later on Wi‑Fi, or accept that one SMS may be sent.
SIM change notifications:
These are informational. As long as you don’t re‑register WhatsApp with a new number, your account stays tied to your Home number.

Pro tip: If you absolutely must remove your Home SIM, ensure every critical account has alternative 2FA (backup codes, authenticator app, recovery contacts) and that iMessage is set to send/receive via your Apple ID email.

Troubleshooting quick fixes

iMessage shows email instead of number:
Settings > Messages > Send & Receive: select your phone number. If it won’t tick, your Home line may lack coverage for activation. Use your Apple ID email temporarily and try activation later when the Home line has signal.
Not receiving WhatsApp codes:
Ensure the Home line is enabled and can receive SMS. Try voice call verification. If you can’t get the code, use WhatsApp Web on a linked device to stay connected until you can re‑verify.
Calls/SMS going out on the wrong line:
iPhone: Edit contact > Preferred Line, or long‑press the SIM label on the call screen.
Android: Set default SIM in the dialler or choose per call/SMS if prompted.
Data still draining on Home SIM:
iPhone: Settings > Mobile Data > turn off “Allow Mobile Data Switching”.
Android: Ensure Preferred Data SIM = Travel and Data Roaming is off on Home.
Can’t install eSIM:
Confirm your phone is carrier‑unlocked and eSIM‑capable. Reboot and retry. If travelling to the US, check compatibility with Esim United States guidance; for Europe, see Esim Western Europe.

Real‑world setups

One country, maximum simplicity:
Example: Weekend in Paris. Install a France data plan, set it as Mobile Data, keep your UK SIM for calls/SMS only. See Esim France.
Multi‑city Euro trip:
Example: Italy–Spain–France in one week. Use a regional plan so you don’t juggle multiple profiles. See Esim Western Europe or country packs like Esim Italy and Esim Spain.
North America loop:
Example: US and Canada. Use Esim North America and keep your home line for OTPs and inbound calls. If only the US, see Esim United States.
Business travellers:
Centralise policy and support so staff don’t toggle iMessage abroad or re‑register WhatsApp. Volume options are available For Business, and partners can access enablement via the Partner Hub.

Browse full coverage and plans on Destinations.

FAQ

Will people still see my usual number on WhatsApp?
Yes. WhatsApp identity stays tied to the number you registered. Using a travel eSIM only changes your data connection, not your WhatsApp number.
Do I need to use “Change Number” in WhatsApp when I travel?
No. Only use “Change Number” if you are permanently moving to a new number. For travel, keep your existing registration.
Can I remove my home SIM entirely?
You can, but you may lose access to SMS/OTP and iMessage number activation. It’s safer to keep the home line inserted and disable its data roaming. If you must remove it, set up backup codes, an authenticator app, and Apple/Google recovery options first.
Will iMessage charge me abroad?
iMessage itself uses data. However, (re)activating iMessage on a phone number can send one international SMS charged by your carrier. Activate before departure and avoid toggling while abroad.
Can I still receive SMS/OTP if data roaming is off on my home SIM?
Usually yes; SMS does not require data. Whether receiving SMS while roaming is charged depends on your carrier. Check your plan before you go.
WhatsApp asked me to verify again – what now?
Proceed only if your home number can receive the SMS/voice code. If not, wait until you have coverage or Wi‑Fi Calling, or use linked devices temporarily. Ensure two‑step verification is enabled to protect against SIM‑swap attacks.

Next step: Choose your travel eSIM and stay connected without losing your number. Start with Destinations.

Read more blogs

Andes Highlights (3 Weeks): Peru–Bolivia–Chile–Argentina Connectivity

Planning a south america itinerary 3 weeks through the high Andes? This route stitches together Peru’s Sacred Valley, Bolivia’s La Paz and Salar de Uyuni, Chile’s Atacama Desert, and northern Argentina’s quebradas or Mendoza wine country—often by long-distance bus and a couple of short flights. Connectivity is different at altitude: coverage is strong in cities but drops in high passes and salt flats; bus Wi‑Fi is patchy; border towns can be blackspots. The smart move is an eSIM with multi‑country coverage, backed by offline maps, offline translations, and a simple routine for crossing borders by bus without losing service. Below you’ll find a practical, connectivity-first itinerary; checklists to prep your phone, apps and documents; and on-the-ground tips for staying online where it matters: booking transport, hailing taxis, backing up photos, and navigating when the signal disappears.If you’re transiting via Europe or North America, you can also add a layover eSIM to stay connected door-to-door. Start with our country list on Destinations, then follow the steps, and you won’t waste time chasing SIM shops at 3,500 metres.The 3‑week Andes route at a glanceWeek 1: Peru (Cusco, Sacred Valley, Machu Picchu) - Fly into Cusco (or Lima then connect). - Base in Cusco; day trips to Pisac/Chinchero/Maras–Moray. - Train to Aguas Calientes; Machu Picchu visit; return to Cusco or continue to Puno/Lake Titicaca.Week 2: Bolivia and Chile (La Paz, Uyuni, San Pedro de Atacama) - Bus/collectivo via Copacabana to La Paz. - Fly or overnight bus to Uyuni. - 3‑day Uyuni–altiplano tour ending in San Pedro de Atacama (Chile).Week 3: Chile and Argentina (Atacama to Salta or Mendoza/Buenos Aires) - Choose: - North: San Pedro to Salta/Jujuy by bus; fly to Buenos Aires. - Or South: San Pedro–Calama flight to Santiago; bus or flight to Mendoza; onward to Buenos Aires.Connectivity notes (quick): - Cities: generally strong 4G/4G+; 5G in major hubs (Santiago, Buenos Aires). - Altitude/rural: expect long no‑signal stretches (Uyuni, altiplano passes, Paso Jama). - Bus Wi‑Fi: often advertised, rarely reliable. Plan to be offline onboard. - Border regions: networks switch; a multi‑country eSIM avoids sudden loss.eSIM vs local SIMs for a 4‑country tripFor a route with multiple borders and remote legs, eSIM wins on time and reliability.What a multi‑country eSIM gets you: - One plan across Peru, Bolivia, Chile, Argentina (check coverage per country on Destinations). - No passport/SIM registration queues at kiosks. - Keep your home number active on the physical SIM for calls/SMS codes. - Instant top‑ups if you burn data on photos or navigation.When a local SIM still helps: - Long stay in one country with heavy data use (e.g., a month in Buenos Aires). - Dead zones where a different local network performs better (rarely worth the hassle on a 3‑week pace).Practical approach: - Use an eSIM as your primary data line across all four countries. - If you find a specific local network far better in one region, add a cheap local SIM and keep the eSIM as backup.Device readiness checklist (before you fly)1) Check eSIM compatibility and SIM‑lock status on your phone.2) Buy and install your eSIM while on home Wi‑Fi. Keep a PDF/printed copy of the QR code.3) Label lines clearly (e.g., “eSIM Andes Data”, “Home SIM”).4) Turn on data roaming for the eSIM; leave roaming off for your home SIM to avoid charges.5) Set up dual‑SIM rules: data on eSIM; calls/SMS default to home SIM if needed.6) Download offline: Google Maps/Organic Maps for all target regions; language packs (Spanish at minimum); bus/air tickets; hotel confirmations.7) Cloud backups: set to upload on Wi‑Fi only; pre‑create shared albums for travel companions.8) Test tethering/hotspot with your laptop/tablet.If you’re transiting popular hubs, consider a short layover eSIM: - USA connections: add an Esim United States or a broader Esim North America.- Europe connections: Madrid/Barcelona? Use an Esim Spain. Paris or Rome? See Esim France and Esim Italy. Multi‑country layovers? Try Esim Western Europe.City‑by‑city connectivity notesCusco & the Sacred Valley (Peru)Coverage: Good in Cusco city; variable in high villages (Maras/Moray) and along Inca Trail approaches.Tips: Download Sacred Valley maps offline; pin viewpoints and ruins. most taxis use WhatsApp—save your accommodation’s number.Machu Picchu/Aguas Calientes: Patchy to none at the citadel. Upload your photos later; don’t rely on live ticket retrieval.Lake Titicaca: Puno and CopacabanaPuno: Reasonable 4G; bus terminals crowded—screenshot QR tickets.Crossing to Copacabana: Expect a signal drop around the border; have directions saved offline.La Paz (Bolivia)Good urban 4G; the cable car network has decent signal but tunnels do not.Yungas/“Death Road” tours: Mountain valleys cause dead zones—share your emergency contacts with the operator, carry a charged power bank, and don’t plan remote calls.Uyuni and the Altiplano (Bolivia to Chile)Uyuni town: OK 4G; ATMs finicky—use Wi‑Fi for banking apps.Salt flats/lagunas: Assume offline for most of the 3‑day tour. Guides often carry satellite phones; agree a pickup time/place in San Pedro and preload your map route.San Pedro de Atacama (Chile)Town: Solid 4G; accommodations often have Wi‑Fi but speeds vary.Geysers, Valle de la Luna: Offline navigation essential; sunrise trips start before mobile networks wake up in some areas.Salta/Jujuy or Mendoza/Buenos Aires (Argentina)Salta/Jujuy: Good city coverage; quebradas have long no‑signal sections.Mendoza: City 4G/5G; vineyards outside town can be patchy.Buenos Aires: Strong 4G/5G; ideal for cloud backups and large downloads before you fly home.Border crossings by bus: step‑by‑stepThe big ones on this route: Peru–Bolivia (Puno/Copacabana), Bolivia–Chile (Uyuni–San Pedro via Hito Cajón), Chile–Argentina (Paso Jama to Salta or Los Libertadores to Mendoza).How to keep service and sanity:1) The day before:- Top up your eSIM data.- Confirm your plan includes both countries you’re entering/leaving.- Download offline maps for both sides of the border and your town of arrival.- Save bus company WhatsApp and terminal address offline.2) On departure morning:- Keep a paper copy or offline PDF of tickets, insurance, and accommodation proof.- Charge phone and power bank; pack a short cable in your daypack.3) On the bus:- Don’t count on bus Wi‑Fi. Keep your eSIM as primary, but expect drops near mountain passes.- If your phone supports it, enable “Wi‑Fi calling” for later when you reach accommodation Wi‑Fi.4) At the border posts:- Data may be unavailable. Keep QR codes and booking numbers offline.- After exiting one country and entering the next, toggle Airplane Mode off/on to re‑register on the new network.- If the eSIM doesn’t attach, manually select a network in Mobile Settings.5) Arrival:- Send your accommodation a quick WhatsApp when you’re back online.- Recheck your eSIM’s data roaming is on; confirm you’re on an in‑country network, not a weak roaming partner.Pro tips: - Dual profiles: If your eSIM allows, keep a secondary profile for a different network in the same country—helpful in border towns.- Cash buffer: Some border terminals don’t accept cards; download a currency converter for offline use.Offline survival kit (5‑minute setup)Maps: Download regions for Cusco, Sacred Valley, Puno, La Paz, Uyuni, San Pedro, Salta/Jujuy or Mendoza, and Buenos Aires.Translations: Download Spanish for offline use; add phrasebook favourites (bus tickets, directions, dietary needs).Documents: Save PDFs of passports, tickets, hotel addresses; star them for quick access.Rides: Screenshots of pickup points; pin bus terminals and hotel doors.Entertainment: Podcasts and playlists for long bus legs, set to download on Wi‑Fi only.Altitude and your tech: what changesCoverage gaps lengthen: Fewer towers at high altitude; valleys can block signal. Assume offline on remote excursions.Batteries drain faster in cold: Keep your phone warm and carry a power bank (10,000–20,000 mAh).Hotel Wi‑Fi may be congested: Schedule big uploads (photo backups, app updates) for big-city stays like Santiago or Buenos Aires.GPS still works offline: Your blue dot shows on offline maps without data—preload everything.Data budgeting for 3 weeksTypical traveller usage across this route: - Messaging/Maps/Bookings: 0.2–0.5 GB/day- Social and photo sharing: 0.3–0.7 GB/day- Occasional video calls/streaming: 0.5–1.0 GB/dayFor a mixed-use trip, plan 15–25 GB for 3 weeks. Heavy creators should double it and upload over hotel Wi‑Fi when possible. If you work remotely, consider a higher‑capacity plan and a backup eSIM; see our guidance on For Business.Practical route with transport and connectivity cuesDays 1–4 Cusco base: Strong city signal; day trips may be spotty—go offline-ready.Days 5–6 Machu Picchu: Expect no service at the ruins; sync tickets ahead.Days 7–8 Puno to La Paz via Copacabana: Border signal drop; re‑register networks after crossing.Days 9–11 Uyuni tour to San Pedro: Treat as offline; charge nightly; carry spare cables.Days 12–14 San Pedro: Stable in town; tours offline; top up data before Paso Jama.Days 15–17 Salta/Jujuy or Mendoza: Good urban 4G; rural patches are offline.Days 18–21 Buenos Aires: Strongest connectivity of the trip; clear your uploads and map downloads for the flight home.Partnering and stopover extrasHospitality and tour operators in the Andes: help your guests stay connected—explore co‑branded solutions via our Partner Hub.Transatlantic flyers: test your eSIM setup on a layover with an Esim United States or Esim Western Europe before hitting high-altitude blackspots.FAQs1) Do I need a local SIM in each country?No. A multi‑country eSIM covering Peru, Bolivia, Chile and Argentina is simpler and works well for a 3‑week pace. Consider a local SIM only if you’ll spend longer in one country and want the absolute best regional coverage.2) Will my WhatsApp number change with an eSIM?No. WhatsApp is tied to your registered number, not your data line. Keep your home SIM active for voice/SMS (roaming off if you wish), and use the eSIM for data—WhatsApp continues as normal.3) Can I hotspot to my laptop or camera?Yes. Enable tethering on your eSIM. Mind your data: cloud backups and OS updates can burn gigabytes—set them to Wi‑Fi only or schedule in big cities.4) What if there’s no signal on the Uyuni/Atacama legs?That’s expected. GPS still works offline. Pre-download maps and translations, carry a power bank, and sync plans with your tour operator before departure.5) Will I get roaming charges at borders?If you’re using a multi‑country eSIM with coverage in both countries, you won’t incur extra roaming fees from your home carrier. Keep roaming off on your home SIM to avoid accidental use.6) I’m connecting via Europe or the US—worth getting a layover eSIM?Yes. It’s an easy way to test your setup and stay reachable. Try Esim North America or country options like Esim Spain, Esim France, or Esim Italy for common hubs.Next step: Browse South America coverage options and build your plan on Destinations.

31 Oct 2025

Student Saver Plans: Semester-Long eSIM Options with Budget Tips

Planning a semester abroad shouldn’t mean juggling short-term SIMs or guessing your data needs every few weeks. Simology’s new Student Saver Plans are built for study terms and placements, with long-validity eSIMs that last 90, 120, or 180 days. You get one activation, predictable data, and better value than stacking monthly bundles. Choose single-country coverage (like the US, France, Italy or Spain) or multi-country regional plans (Western Europe or North America) depending on your itinerary. We’ve also streamlined student verification so you can unlock student-only pricing without hassle. Below, you’ll find a quick plan overview, region-by-region guidance, a clear verification flow, installation steps, and practical data budgeting tactics to make your allowance last from orientation to finals. If you’re organising for a cohort or exchange group, there are group options too. Start by checking where you’re headed on our Destinations page, then pick the plan length that matches your term dates.Student Saver Plans at a glance (90 / 120 / 180 days)Think of these as “set-and-forget” eSIMs for the whole term. Each plan gives you a fixed data allowance with long validity and simple top-ups.90 days (Quarter)Best for: Short exchanges, internships, language courses, or mid-term travel.Typical data options: 20–50 GB total, depending on country/region.Good to know: Ideal if you’ll use campus Wi‑Fi heavily and only need mobile data for maps, messaging, and occasional hotspotting.120 days (Semester)Best for: Standard semester abroad or teaching placements that run over three to four months.Typical data options: 30–80 GB total, with optional top-ups if you stream or hotspot.Good to know: The sweet spot for most students—enough headroom for study weeks, weekend trips, and exam crunch time.180 days (Extended Semester)Best for: Extended placements, double-term programmes, or combining study with travel before/after term.Typical data options: 50–120 GB total, with the flexibility to add more if needed.Good to know: Maximum convenience—activate once and forget about expiry until the end of your programme.Pro tips: - If you’re travelling across multiple countries, pick a regional eSIM to avoid swapping. For example, Esim Western Europe for Schengen travel or Esim North America if you’ll be moving between Canada, the US, and Mexico. - Heavy video users (TikTok, YouTube, Reels) should lean towards mid-to-high data options or plan on a mid-term top-up.Choose coverage by destinationPick the footprint that matches your itinerary. You can browse all footprints on Destinations, or jump straight to common student picks:United States: Esim United StatesIdeal if you’ll mostly stay on one US campus with weekend trips.Consider a regional option (Esim North America) if you’ll cross into Canada or Mexico.Western Europe: Esim Western EuropeBest for Erasmus students or anyone city-hopping across Schengen countries.Avoids the need for multiple local SIMs and inconsistent roaming policies.France: Esim FranceGood for single-country study with frequent reliance on campus Wi‑Fi.If you’ll pop into neighbouring countries, consider Western Europe instead.Italy: Esim ItalySolid for city and regional travel within Italy; upgrade to Western Europe for weekend trips to nearby countries.Spain: Esim SpainGreat for students staying in Spain for the term; again, Western Europe suits multi-country travel.North America (regional): Esim North AmericaIdeal for US/Canada exchange pairs and cross-border research trips.When to choose single-country vs regional: - Single-country: You’ll stay mostly in one country and want the best-value per GB in that footprint. - Regional: You plan multi-country weekends or fieldwork. The convenience of one eSIM usually outweighs the slight premium.Student verification: quick and privacy-consciousUnlock student pricing in minutes. Here’s how the verification flow works:1) Create your Simology account - Sign up with the email you actively use. If you already have a university email, use it—it may auto-verify.2) Select your plan - Choose the 90/120/180-day option and your destination footprint.3) Verify your student status - Option A: University email verification - We’ll send a code to your .edu/.ac or institution-issued address. Enter the code to verify. - Option B: Document verification - If you don’t have a university email, upload proof such as your student ID card or current enrolment letter. Ensure your name, institution, and validity dates are visible.4) Get approval - Most email verifications are instant. Document checks typically complete within a business day. We’ll notify you by email.5) Apply discount and checkout - Your student rate is automatically applied. Complete checkout to receive your eSIM activation details.Notes: - Not sure if you qualify? Exchange acceptance letters usually count. If you’re under 18, a guardian can still pay from their account while you verify your student status. - If you’re purchasing for a cohort, see the group options in For Business or partner with us via the Partner Hub.Install and set up your eSIM: 5-minute checklistBefore you leave: - Check that your phone is unlocked and eSIM‑compatible. - Update iOS/Android to the latest version over Wi‑Fi. - Download offline maps for your host city/region (Google Maps, Apple Maps). - Save your eSIM QR code/email and your Simology account login offline.On activation day: 1) Connect to reliable Wi‑Fi. 2) Open your phone’s Mobile/Cellular settings. 3) Add eSIM via QR code or activation code. 4) Label your lines (e.g., “Semester Data” for the eSIM; keep your home SIM as “Home” if you’ll retain it). 5) Set the eSIM as “Mobile Data” and enable “Data Roaming” for the eSIM profile. 6) Keep your home SIM for calls/SMS if needed; set “Default Voice Line” accordingly. 7) Confirm APN settings auto-fill (most devices do this; we’ll include details in your activation email if manual entry is required). 8) Test with a web page and a maps search.Pro tips: - If you plan to retain your home SIM for 2FA, turn off “Mobile Data” for the home SIM to avoid unexpected roaming charges. - Add a data usage widget or shortcut to your home screen so you can check your remaining balance quickly.Budget your data across a semesterStretch your allowance without feeling restricted. Adopt these habits in week one:Lock in your streaming qualitySet YouTube/Netflix/Spotify to “Data Saver” or a capped resolution (480p/720p) on mobile.Disable “Autoplay” on social apps.Control background dataiOS: Low Data Mode on the eSIM line; restrict background app refresh per app.Android: Data Saver + per‑app background data limits.Optimise maps and travel appsDownload offline areas and transit schedules.Cache language packs in translation apps.Messaging and mediaDisable auto‑download for photos/videos in WhatsApp/Telegram/Signal.Use “compress images” options where available.System updates and backupsRestrict cloud backups and OS/app updates to Wi‑Fi only.Pause auto‑upload of photos over mobile data.Hotspot wiselyCap hotspot usage to specific tasks (submitting coursework, cloud sync).Avoid streaming or large updates over tethering.Schedule Wi‑FiFavourites: campus, library, residence halls, cafés you trust.Use a password manager to store Wi‑Fi credentials securely.Track and alertEnable data usage alerts on your device (e.g., warn at 75%, 90%).Check your Simology dashboard weekly; top up proactively before exams or travel weeks.Rough planning guidance: - Light user (messaging/maps/email): 3–5 GB/month. - Moderate (social + some streaming/hotspot): 8–15 GB/month. - Heavy (daily video, frequent hotspotting): 20–30+ GB/month. Match your 90/120/180-day plan to your monthly pattern times the number of months, then add a 10–20% buffer for exam and travel peaks.Top-ups, pauses, and managing your planTop-upsAdd data instantly in your Simology account. Your validity remains; added data rolls into the current term window.Pause/suspendIf you have a mid-term break away from your destination, contact support to discuss options. Eligibility varies by footprint.Data rollover between semestersIf you’re continuing for another term, look for renewal offers. Some footprints support carryover when you renew before expiry.Device changeseSIMs are designed for a single device. If you must change phones mid-term, contact support—we’ll advise based on your device and plan.Fair useLong-validity plans include reasonable use policies to protect network quality. Heavy tethering may be deprioritised.Regional vs single-country: scenariosYou’re based in Paris with weekend trips to Belgium, Netherlands, and GermanyPick: Esim Western Europe, 120 days, mid‑to‑high data.Why: Seamless cross-border use, no SIM swaps.You’re in Los Angeles all term with one conference in VancouverPick: Esim North America, 120 days, moderate data.Why: Coverage across the US and Canada with one eSIM.You’re in Bologna with mostly on-campus life and residence Wi‑FiPick: Esim Italy, 90 or 120 days, low‑to‑moderate data.Why: Best value for single-country usage.You’re doing a Spanish language course, then touring Portugal and FrancePick: Esim Western Europe, 180 days if you’ll travel before/after classes.Why: One plan across multiple countries for the full window.You’re on a US exchange with heavy campus Wi‑Fi but frequent weekend road tripsPick: Esim United States, 120 days, moderate data plus a planned top‑up in mid-term.For group organisers, faculty leads, and societiesIf you’re coordinating eSIMs for an exchange cohort, summer school, or a student society trip: - Centralised purchasing and distribution - Use Simology’s group tools to assign eSIMs and track activations. - Flexible billing - Pay centrally or distribute payment links to students. - Support and onboarding - We can provide a short guide for your pre‑departure briefing.Start with For Business for group enquiries or explore partnership options in the Partner Hub if your institution wants ongoing access and rates.Quick setup checklist before you flyConfirm eSIM compatibility and unlock status.Decide: single-country vs regional coverage.Match 90/120/180 days to your calendar (add a buffer week).Estimate monthly usage; pick your data tier with a 10–20% cushion.Complete student verification early to lock in pricing.Save your QR code and installation guide offline.Download offline maps and campus apps.Configure data saver modes on day one.FAQ1) Do I get a phone number with an eSIM? - Our Student Saver Plans are data‑first. Many students use apps (WhatsApp, FaceTime, Messenger) for calls and messages. If you need local voice/SMS, contact support for options available in your destination.2) Can I keep my home SIM active for calls and texts? - Yes. Set your eSIM as the data line and keep your home SIM for voice/SMS/2FA. Turn off mobile data on the home SIM to avoid roaming charges.3) Will my eSIM work if I travel to a neighbouring country? - Single‑country eSIMs are for use in that country only. Choose a regional plan like Esim Western Europe or Esim North America if you’ll cross borders.4) Can I use hotspot/tethering? - Yes, within fair‑use limits. Regular study tasks are fine; avoid large downloads or extended HD streaming over hotspot to conserve data.5) What happens if I run out of data mid‑term? - You can top up instantly in your Simology account. Your plan validity (90/120/180 days) remains unchanged.6) I don’t have a .edu/.ac email. Can I still get the student rate? - Yes. Upload a valid student ID or enrolment letter matching your name and current term dates during verification.Next step: Check your destination and pick your Student Saver Plan length on our Destinations page.

30 Oct 2025

Private DNS & Safer Browsing on the Road (Without Slowing Down)

Travelling often means bouncing between hotel Wi‑Fi, café hotspots and mobile data. Each network you join can see, intercept or manipulate your DNS — the phone book lookups your device makes to turn website names into IP addresses. That’s where Private DNS (encrypted DNS) comes in. It wraps those lookups in encryption (DNS over TLS or DNS over HTTPS) so intermediaries can’t snoop or tamper. The result: cleaner, more private browsing with little to no speed penalty.This guide explains how private DNS works, when to use it versus a VPN, and exactly how to enable it on Android, iOS/iPadOS, Windows and macOS. We’ll also cover captive portal “sign‑in” gotchas in hotels and airports, battery impact, and which DNS providers are worth trusting on the road. Combine private DNS with a local eSIM and you’ll avoid flaky public Wi‑Fi entirely in many destinations — see our regional options on Destinations including Esim United States, Esim France, Esim Italy, Esim Spain, Esim Western Europe and Esim North America.What is Private DNS and why travellers should careDNS translates website names into IP addresses. By default, these lookups are unencrypted and readable by anyone running the network you’re on (hotel, café, airport).Private DNS encrypts those lookups:DNS over TLS (DoT): DNS inside a TLS tunnel on port 853 (Android’s “Private DNS” uses DoT).DNS over HTTPS (DoH): DNS inside standard HTTPS on port 443 (supported in Windows 11 and via apps on iOS/macOS).Benefits:Stops local network operators from snooping your browsing destinations.Blocks simple DNS‑level ads/malware if you choose a provider that offers filtering.Reduces risk of DNS hijacking on hostile or misconfigured networks.Limits to understand: - Private DNS does not hide your IP address or encrypt the rest of your traffic — the websites you visit still see your IP, and the network can see the IPs you connect to. For that, use a VPN. - It may interfere with captive portals (those “agree & connect” pages) — easy to work around; see below.Private DNS vs VPN: which should you use on the road?Use Private DNS when:You want lightweight privacy without changing location or routing all data.You’re on mobile data (eSIM/local SIM) and mainly need DNS protection.You want minimal battery and speed impact.Use a VPN when:You’re on untrusted public Wi‑Fi and doing sensitive tasks (banking, work logins).You need to access corporate resources or a specific country’s services.You must protect all traffic metadata, not just DNS.Pro tip: On mobile networks, TLS in apps (HTTPS) already secures content. Pairing that with Private DNS covers the main leak (DNS) without the heavier overhead of a VPN.How to enable Private DNS on your devices (How‑To)Android 9 and newer (DoT)Most modern Android devices support system‑wide Private DNS (DNS over TLS).1) Open Settings > Network & Internet (or Connections on Samsung). 2) Tap “Private DNS”. 3) Choose “Private DNS provider hostname”. 4) Enter one provider hostname (examples): - Cloudflare: 1dot1dot1dot1.cloudflare-dns.com - Google: dns.google - Quad9 (malware blocking): dns.quad9.net - AdGuard (ad/malware filtering): dns.adguard.com 5) Save and reconnect to your network.Notes: - “Automatic” tries encrypted DNS only if your current DNS supports DoT; “Off” reverts to unencrypted DNS. - If a captive portal won’t load, temporarily set Private DNS to “Off”, sign in, then switch it back on.Pro tip: Quad9 is a strong travel choice for malware/phishing protection without logging personal data.iPhone and iPad (iOS 14+ via profile or app)iOS doesn’t have a one‑tap system setting for encrypted DNS. Use a trusted DNS app or configuration profile.Option A — Cloudflare or NextDNS app: 1) Install the “Cloudflare 1.1.1.1” app or the “NextDNS” app from the App Store. 2) Open the app, grant permission to add a VPN/DNS configuration (this is a local device profile, not a full VPN tunnel for Cloudflare’s “DNS only” mode). 3) Enable “DNS‑only” mode (Cloudflare “1.1.1.1” without Warp) or choose your NextDNS profile. 4) Leave the app enabled; it will enforce DoH across apps.Option B — Install an encrypted DNS profile: 1) Create a profile with a provider (e.g., NextDNS web dashboard). 2) Download and install the mobile configuration profile in Settings > General > VPN & Device Management. 3) Verify the profile is active.Captive portal tip: Toggle the DNS app off, complete the Wi‑Fi sign‑in, then re‑enable.Windows 11 (DoH)1) Settings > Network & Internet > Wi‑Fi (or Ethernet) > Hardware properties. 2) Edit DNS server assignment > Manual. 3) Enable IPv4 (and IPv6 if you use it). 4) Enter DNS addresses (e.g., 1.1.1.1 and 1.0.0.1 for Cloudflare; 9.9.9.9 and 149.112.112.112 for Quad9). 5) Set “Preferred DNS encryption” to “Encrypted only (DNS over HTTPS)”. 6) Save. Reconnect to the network.Quick verify: Visit your provider’s test page (e.g., Cloudflare’s “Help” page) to confirm DoH is active.macOS (Big Sur and newer)macOS supports encrypted DNS via configuration profiles or apps.Option A — Use an app (simplest): 1) Install Cloudflare 1.1.1.1 or NextDNS app for macOS. 2) Grant permissions to add a DNS profile. 3) Enable DNS‑only mode (Cloudflare) or your NextDNS configuration.Option B — Install a DNS profile: 1) Generate a DoH/DoT profile from your provider (e.g., NextDNS). 2) Install via System Settings > Privacy & Security > Profiles (or Profiles in System Preferences on older macOS). 3) Apply to active network services.Captive portal tip: Pause the app/profile temporarily to complete hotel/airport sign‑in pages.Captive portals: the gotcha and the fixEncrypted DNS can prevent captive portals from redirecting you to the sign‑in page because the network expects to intercept DNS. Here’s how to handle it smoothly:Join the Wi‑Fi network.If the login page doesn’t appear within 10 seconds:Android: Settings > Network & Internet > Private DNS > Off. Then re‑open your browser and go to http://neverssl.com to trigger the portal.iOS/macOS: Pause your DNS app/profile. Try http://neverssl.com or open the Wi‑Fi network’s info and tap “Join Network”/“Login”.Windows: Temporarily switch encryption to “Unencrypted only” or disable your DNS tool; reconnect and sign in.Once you’re online, re‑enable Private DNS.Pro tips: - Some networks re‑check the portal after idle time; keep the DNS tool handy to toggle. - If the portal still won’t load, “Forget” the network and try again with Private DNS off until authenticated.Will Private DNS slow me down or drain battery?Speed: - The overhead of DoT/DoH is tiny after the first handshake. With anycast networks (Cloudflare, Google, Quad9), latency is comparable to or better than many hotel DNS servers. - DoH may add a fractionally higher CPU cost than plain DNS, but it’s negligible on modern devices. - Pick a nearby, reputable provider to avoid detours.Battery: - Private DNS maintains lightweight encrypted sessions; the impact is minimal, far less than a full VPN. - VPNs keep an always‑on tunnel with regular keep‑alive traffic and packet processing — expect noticeably higher battery drain. - On mobile data, modern radios dominate battery use; private DNS won’t be the deciding factor.Testing tip: Use a DNS benchmark app or “dig” from a laptop tethered to your phone to compare latency before and after.Choosing a trusted DNS providerLook for a clear privacy policy, broad global footprint, and (if desired) security filtering:Cloudflare (1.1.1.1): Fast, strong privacy stance, no content filtering by default. DoT: 1dot1dot1dot1.cloudflare-dns.com. DoH supported widely.Google (8.8.8.8): Globally fast and reliable; transparent but different privacy model from Cloudflare.Quad9 (9.9.9.9): Security‑focused with threat blocking, non‑profit; strong choice for travellers wanting extra protection.AdGuard DNS: Optional ad/malware blocking; privacy‑friendly.NextDNS: Highly configurable filtering, logs you control; requires a personalised profile.Pro tip: For family devices, NextDNS/AdGuard can block trackers and malicious domains while travelling, reducing risky clicks on unfamiliar networks.A practical travel checklistBefore you fly: - Update your device OS and apps (security patches). - Set up Private DNS or install your DNS app/profile. - Save provider hostnames or app toggles for quick captive portal workarounds. - Add a lightweight VPN for when you must trust public Wi‑Fi. - Consider a local eSIM so you can skip public Wi‑Fi altogether; browse regional options on Destinations — including Esim Western Europe and Esim North America.On the day: - Prefer mobile data where possible. If you’re heading to the US or Europe, check Esim United States, Esim France, Esim Italy and Esim Spain. - On Wi‑Fi, enable Private DNS; toggle off only briefly for captive portals. - Use a VPN for banking or work portals on public Wi‑Fi. - Avoid installing random “Wi‑Fi booster” apps; stick to reputable DNS/VPN tools.For teams and partners: - Business travellers can standardise encrypted DNS and eSIMs through our For Business solutions. - Travel providers and IT resellers can collaborate via our Partner Hub.When you still need a VPN (even with Private DNS)Accessing corporate networks or region‑locked services where location matters.Using truly untrusted or tampered networks (e.g., conferences, shared coworking).Hiding destination IP metadata from local network operators.Enforcing security policies across all traffic for a business fleet.Private DNS protects DNS queries; a VPN protects the entire session. It’s fine to run both when needed — start with Private DNS by default, escalate to VPN for sensitive sessions.FAQDoes Private DNS change my location like a VPN?No. It only encrypts DNS lookups. Your IP address and approximate location remain the same.Will Private DNS break streaming or apps while travelling?Rarely. Some hotel or airline networks require their own DNS; if something fails, temporarily switch Private DNS off, then back on after login/stream start.Is DoT or DoH better for travel?Both are secure. Use what your device supports natively: Android prefers DoT; Windows 11 uses DoH. Performance differences are negligible.Can I use Private DNS on cellular data with an eSIM?Yes. It works on any network type. Pairing Private DNS with a local eSIM gives private, fast lookups without relying on risky public Wi‑Fi. See regional options on Destinations.Which DNS provider should I pick?For speed and privacy: Cloudflare or Google. For added threat protection: Quad9. For custom filtering/log control: NextDNS. Stick to one you trust.Does Private DNS save battery compared to a VPN?Yes. It has a much smaller battery impact because it encrypts only DNS, not all traffic.Next step: Set up Private DNS on your devices today, then choose a local eSIM for your next trip on Destinations so you can rely on mobile data instead of risky public Wi‑Fi.

30 Oct 2025